Academic Year  2023 - 2024

International / National Journals 

  • Periasamy, Karthigairajan.M,, R.Venkatesh, S.Padmavathy, “Enhancement of High Density polyethylene (HDPE) composite behaviour by TiO2 and Al2O3f Bio Ceramic Fillers”, Journal of Polymer Research, (Published Online)
  • Sivashankar, R.Thanigaivelan, K.G.Saravanan, “Electrochemical Micromachining and Parameter Optimization on AZ31 Alloy-ANN and TOPSIS Techniques” , Bulletin of the Chemical Society of Ethiopia, Vol. 37 No. 5 (2023)
  • R Karthik, N Shiva Sankaran , K Venkatesh Raja, R Venkatesh, “Synthesis and characteristics evaluation of magnesium alloy (AZ91) nanocomposite developed with ZrO2 via liquid state stir cast process”, Sadhana-Academy Proceedings in Engineering Sciences, 48, 188 (2023)
  • R. Padmavathi, R. Venkatesh, G. Ramya Devi, V. Muthukumar, “Synthesis and Characteristics Evaluation of Sicnp and Sicnp/CNT-Reinforced AZ91D Alloy Hybrid Nanocomposites Via Semisolid Stir casting Technique”, International Journal of Metalcasting, (Published Online)
  • Senthilkumar, K. Revathi, R. Venkatesh, E. Sivaprakash, “Enhancement of Magnesium alloy (AZ31B) Nanocomposite by the Additions of Zirconia Nanoparticle Via Stircasting Technique: Physical, Microstructural and Mechanical Behaviour”, International Journal of Metalcasting, (Published Online)
  • Prudhvi Krishna Amburi, G.Senthilkumar, A.Nithya, “Novel Use of Cuo nanoparticles additive for improving thermal conductivity of MgO/water and MWCNT/water nanofluids”, Journal of Thermal Analysis and Calorimetry, (Published Online)
  • R. Padmavathi, R. Venkatesh, Melvin Victor De Poures, G. Selvakumar, “Synthesis of Al/Mg Hybrid Nanocomposite by Electromagnetic Stir Cast: Characteristics Study”, Silicon, (Published Online)
  • Venkatesh, P. Sakthivel, G. Selvakumar, A. Mohana Krishnan, P. Purushothaman, C. B. Priya, “Mechanical and Thermal Properties of a waste fly ash-bonded Al-10 Mg alloy Composite Improved by bioceramic Silicon nanoparticles”, Biomass Conversion and Biorefinery, (Published Online).
  • S. Vandaarkuzhali, P. Balu, D.Jayabalakrishnan, M. Maniyarasan, Influence on the energy conservation and Green Environment R152A Refrigeration with various Nano Refrigerants”, Nano, (Published Online)

  • Nagaraj, Mohamed Ali, R.Venkatesh, Ra.Aravind, “Synthesis of Green Cocos Nucifera L Fiber loading waste LDPE Composites enriched with SiC: Performance Evalution”, Silicon, (Published Online)K.Yesuraj,Mohammed Ali, R.Venkatesh, S.Chandrakumar, “SiC actions on characteristics analysis of AZ91D hybrid nano composite by Liquid state processing” International Journal of Applied Ceramic Technology, (Published Online)

  • K.Suganeswaran, P.Muthukumar, R.Sathiskumar, R.Parameshwaran, N.Nithyavathy, “Evaluation of Microstructural, Tribological and Tensile Characteristics of AA7075 Surface composites fabricated through Friction stir Process” Journal of Process Mechanical Engineering Part – E, (Published Online)

  • Periasamy Kaliyannan, A.H.Seikh, M.A.Kalam, R.Venkatesh, “ Fabrication and Characteristics study of Aluminium Alloy hybrid Nanocomposite Synthesized with SiC and Waste Metal Powder”, Silicon, (Online Published)

  • Periasamy Kaliyannan, Murugan perumal, J.Manivannan, R.Venkatesh, “Enhancing Mechanical and Functional Properties of LM25 Alloy Through Squeeze cast Hybrid Nano Composite incorporating Breadfruit seed husk ash and Graphite nano Particles”, International Journal of Cast Metals Research, (Online Published)

  • A.Baraniraj, A.P.Sathiyagnanam, R.Venkatesh, S.Kumaravel, “Characterization Effect of Pozzolanic Waste-Reinforced A356 Alloy Composites by Liquid Metallurgy Semisolid Stir Cast”, Journal of Material Engineering and Performance, (Published Online)

  • M.Rajesh, S.Kumaravel, M.Kumaresan, “Multiobjective optimization of MIG Welding process Parameters on AA6061-T6 using Taguchi-GRA entropy Method” AIP Conference Proceedings, (Published Online)

  • P.Venugopal, Thayammal Ganesan Arul, V.Selvam, K.Saranya, “Effect of Electrochemical Process Parameters on the Hastelloy C-276 Alloy for Machining Speed and Surface Corrosion factor” Materiali in Technologije, (Published Online)

Academic Year  2023 - 2024

International / National Conferences

 

  • Mr.C.Dineshbabu, “Investigation of the shot peening process and surface modification technique to improve Heat Transfer of the Shell and Tube Heat Exchanger”, International Conference on Engineering and Technology (ICET- 2023) at Selvam College of Technology on 21.09.2023 & 22.09.2023
  • Mr.R.Arivazhagan, “Effective utilization of Plastic Wastes to Bio-Hydrogen via Pyrolysis technique: Characteristics Evaluation”, First IEEE International Conference on Multidisciplinary Research in Technology and Management (MRTM 23) on 22.09.2023 & 23.09.2023
  • Mr.R.Arivazhagan, “Enhancement of Solar Power Conversion Efficiency by an active dual thin layer of Ga-ZnO for EVs Applications”, First IEEE International Conference on Multidisciplinary Research in Technology and Management (MRTM 23) on 22.09.2023 & 23.09.2023
  • Mr.R.Arivazhagan, “Effect of ZnO and CdZnO thin Flim Transistors on Solar Electrical and Optical Behaviour Characteristics Study”, First IEEE International Conference on Multidisciplinary Research in Technology and Management (MRTM 23) on 22.09.2023 & 23.09.2023

Academic Year  2022 - 2023 

International / National Journals 

  • T. Maridurai, R. Arivazhagan, S. SivaChandran, R. Venkatesh, S.Baskar, “Review on direct steam generation using concentrated solar collectors”, AIP Conference Proceedings, Volume 2473, Issue 1, pp. 020008 (1-4)
  • S. SivaChandran, R. Venkatesh, S. Baskar, R. Arivazhagan, T.Maridurai, “Experimental study of shell and tube heat Exchanger”, AIP Conference Proceedings, Volume 2473, Issue 1, pp. 020005 (1-8)
  • R. Venkatesh,  S. SivaChandran,  T. Maridurai, S. Baskar, N.Sivashankar, R. Arivazhagan, “Magnesium alloy machining and its methodology: A systematic review and analyses”, AIP Conference Proceedings, Volume 2473, Issue 1, pp. 020003 (1-7)
  • S. Baskar, T. Maridurai, R. Arivazhagan, S. SivaChandran,  R.Venkatesh, “Thermal management of solar  thermoelectric power generation”, AIP Conference Proceedings, Volume 2473, Issue 1, pp. 020010 (1-6)
  • R. Arivazhagan, S.Baskar, R. Venkatesh, T. Maridurai, S. SivaChandran, “Performance analysis of steam generators in thermal power plant”, AIP Conference Proceedings, Vol. 2473, Issue no. 1, pp. 020006 (1-5)
  • S. Marimuthu, P. Lakshmanan, K. Raju,  A. Mohana Krishnan, R. Venkatesh,  M. Dineshkumar, “Performance study on glazzed solar air heater for agri products”, Elsevier- Materials Today Proceedings, (Online Published)
  • R. Venkatesh,  S. Marimuthu, A. Mohana Krishnan, N. Ravikumar, K. Gopalakrishnan, T. Thirugnanasambandham, “Incorporating tool identification system in normal machining centre using radio frequency identification”, Elsevier- Materials Today Proceedings, (Online Published)
  • G. Saravanan, D. Jagadeesh, C. SaravaMurthi, P.Pugalenthi, “Experimental investigation and optimizing the predict of GTAW process parameter on Al5052”, AIP Conference Proceedings, Volume 2473, Issue 1, pp. 020001 (1-16)
  • Periasamy K,  Sivashankar N, Viswanathan R, Balaji J, “Optimization of multi passes friction stir process parameters on AA7075 Surface Hybrid Composite with reinforcement of SiC and Gr”, Journal of Ceramic Processing Research,  Vol. 23, issue no. 3, pp.335-343
  • S. Vijayakumar, S. Anitha, R. Arivazhagan, Ashebir Dingeto Hailu, T. V. Janardhana Rao, Hari Prasadarao Pydi, “Wear Investigation of Aluminum Alloy Surface Layers Fabricated through Friction Stir Welding Method”, Advances in Materials Science and Engineering, Vol. 2022, Article ID 4120145
  • Bhiksha Gugulothu, P. Anusha,  M. Naga Swapna Sri, S. Vijayakumar, R. Periyasamy, Suresh Seetharaman, “Optimization of Stir-Squeeze Casting Parameters to Analyze the Mechanical Properties of Al7475/B4C/Al2O3/TiB2 Hybrid Composites by the Taguchi Method”, Advances in Materials Science and Engineering, Vol. 2022, Article ID 3608984
  • S. Prabhu, M. Naga Swapna Sri, P. Anusha, G. Saravanan, K. Kannan, Selvaraj Manickam, “Improvement of Mechanical Behavior of FSW Dissimilar Aluminum Alloys by Postweld Heat Treatments”, Advances in Materials Science and Engineering, Vol. 2022, Article ID 3180442
  • R. Venkatesh, P. Raja Sekaran, K. Udayakumar, D. Jagadeesh, K. Raju, Melkamu Beyene Bayu, “Adsorption and Photocatalytic Degradation Properties of Bimetallic Ag/MgO/Biochar Nanocomposites”, Adsorption Science and Technology, Vol.2022, Article ID 3631584
  • K. Periasamy, S. Ganesh, S. Chandra Kumar, S. Nandhakumar, T. Thirugnanasambandham,Murtesa Dabesa Gurmesa, “Appraisal of Thermomechanical Performance of Aluminum Metal Matrix Composites Using Stir Casting Technique, Advances in Materials Science and Engineering, Vol.2022, Article ID 2381425
  • K.Suganeswaran, R.Sathiskumar, V.K.Gobinath, K.Periasamy, R.Parameshwaran, N.Nithyavathy, “Microstructural characterization, Hardness and Impact behavior of AA7075/steel slag surface composite fabricated through multipass friction stir process”, Journal of Adhesion Science and Technology, (Online Published)
  • G.Ramyadevi, C.B.Priya, C.Dineshbabu, R.Karthick, K.Thanigavelmurugan, Prabhu Paramasivam, “Modelling and Deliberation of Multireinforcement Surface on Tribothermal Adsorption Performance of Nickel Alloy Matrix Nano Composites”, Adsorption Science and Technology, Vol.2022, Article ID 3697662
  • N.Sivashankar, R.Thanigaivelan, “Electrochemical Micromachining of Magnesium AZ31 alloy using minimum quantity electrolyte”, Materials and Manufacturing Processes, (Online Published)
  • N.Ravikumar, R.Vijayan, R.Viswanathan     “Multi-response optimization for turning of magnesium alloy with untreated and cryogenic treated carbide inserts by grey relational analysis”, Journal of Ceramic Processing Research, Vol.24, No.1, pp. 142-152.
  • K.Periasamy, Katragadda Sudhir Chakravarthy, Jabihulla Shariff Md, S.Madhu “A detailed Evaluation of mechanical Properties in newly developed Cellulosic fiber: Cissus vitiginea L as a reinforcement for polymer composite”, Biomass Conversion and Biorefinery, (online published)P.Raja Sekaran, H.Ramakrishnan, R.Venkatesh, A.Nithya, “Mechanical and Physical Characterization studies of Nano Ceramic Reinforced Al-Mg Hybrid Composites”, Silicon (online published)
  • V.Gopinath, R.Periyasamy, K.Gunasekaran, M.Venkatasudhahar, P.Suresh, “Effect of Corn oil Methyl Ester and Exhaust gas Reciurculation on performance and Emission Characterstics of Diesel Engine”, Mechanika, Vol.29, No.1, pp. 74-80
  • R.Venkatesh, Suhas Ballal, A.Mohana Krishnan, S.Prabagaran, S.Mohankumar, Elangomathyavan Ramaraj, “Effect of Fiber layer formation on mechanical and wear properties of natural fiber filled epoxy hybrid composites”, Heliyon, (online published)
  • A. Baraniraj, A. P. Sathiyagnanam, R.Venkatesh,         Ra. Aravind “Silicon Carbide Particle Enriched Magnesium Alloy (AZ91) Composite: Physical, Microstructural and Mechanical Studies”, Silicon (online published)
  • Gobinath Velu Kaliyannan, Uma Gandhi,  Rajasekar Rathanasamy, Mohankumar Subramanian, Suganeswaran Kandasamy,  Raja Gunasekaran,  Sathish Kumar Palaniappan “Effect Of Zinc Oxide—Aluminium Oxide Mechanical Blends for Boosting the Polycrystalline Silicon Solar Cell Performance through Antireflection Properties”, Silicon (online published)
  • L. Natrayan, Raviteja Surakasi, Pravin P. Patil, S. Kaliappan, V. Selvam, P. Murugan “Optimizing Nu,erous influencing parameters of Nano – Sio2/Banana Fiber reinforced hybrid composites using Taguchi and ANN Approach”, Journal of Nanomaterials, Volume 2023, Article ID 3317584
  • Srinivasan Appadurai Saravanan Kanthasamy Ganesan, Viswanathan Rangasamy, Karthikeyan Saravanan Kanakasabapathi “Optimization and Effect of Dielectric Fluid With Zr and Ni on Electrical Discharge Machining of Die Steel Material”, Chemical Industry and Chemical Engineering Quarterly, Vol. 29, No. 4, pp. 311-318
  • R.Sasikumar, S.Prabagaran, R.Venkatesh, S.Kumaravel “Effect of Tamarind fruit fiber contribution in epoxy resin composites as biodegradable nature: characterization and property evalution”, Biomass Conversion and Biorefinery (online published)
  • R.Venkatesh, R.Roopashree, Souvik Sur,n Gaurav Kumar, P.Raja, Melvin Victor De Poures, “Investigation and Performance study of Hibiscus Saddariffa bast fiber reinforced HDPE Composite enhanced by Silica Nanoparticles derived from agricultural Residues”, Fibers and Polymers (online published)
  • P.R.Kannan, K.Periasamy, P.Pravin, J.R.Vinodkumar, “An experimental investigation of wire breakage and performance optimisation of WEDM process on machining of recycled aluminium alloy metal matrix composite”, Materials Science-Poland, Vol. 40, issue no. 3, pp.12-26.
  • R.Venkatesh, N.Karthi, N.Kawin, T.Prakash, C.Rameshkannan, M.Karthigarajan, Ketemebobe, “Synthesis and Application of Nanocomposites for Adsorption Heat Transformation and Storage”, Adsorption Science and Technology, Vol.2022, Article ID 7423102.
  • L. Natrayan , A. Bhaskar, Pravin P. Patil, S. Kaliappan , M. Dineshkumar, E. S. Esakkiraj, “Optimization of Filler Content and Size on Mechanical Performance of Graphene/Hemp/Epoxy-Based Hybrid Composites using Taguchi with ANN Technique”, Journal of Nanomaterials, Vol. 2023, Article ID 8235077.
  • P.Raja Sekaran, H.Ramakrishnan, R.Venkatesh, A.Nithya, “Mechanical and Physical Characterization studies of Nano Ceramic Reinforced Al-Mg Hybrid Composites”, Silicon (online published)

International Conferences

  • Dr.D.Jagadeesh, “Performance Evaluation of Cross over Studies on Solar Duct”, International conference on Adoptive Technologies for Sustainable Growth at   Paavai Engineering College 17th March 2023.
  • Mr.Ra.Aravind, “Exploring the Environmental Corrosion Resistance and Mechanism of high entropy alloys: An Overview”, at 2nd International Virtual Conference on Advances in Automobile, Manufacturing and Mechanical Engineering (ICAAMME’2023) Eswari Engineering College on 28th April 2023.
  • Mr.R.Karthik, “Mechanical and Corrosion behaviour on AZ91/ZRO2 magnesium Metal Matrix Composites using Stir Casting Techniques”, at 2nd International Virtual Conference on Advances in Automobile, Manufacturing and Mechanical Engineering (ICAAMME’2023) Eswari Engineering College on 28th April 2023.
  • Mr.E.Sivaprakash, “Effect of PV panel cooling by PCM”,    at  International conference on Recent Trends in Mechanical Engineering JJ College of Engineering and Technology on 17th & 18th April 2023
  • Mr.G.Selvakumar, “Remote Keyless Entry Application in Car”, at 5th International Conference on Recent Innovations in Science & technology (RIST 2023) Holy Grace Academy of Engineering on 07th & 08th April 2023.
  • Mr.R.Karthik, “Enhancing the Material properties of Surface Composite (AZ61/ZrO2) Fabrication via Friction Stir Processing”, at 5th International Conference on Recent Innovations in Science & technology (RIST 2023) Holy Grace Academy of Engineering on 07th & 08th April 2023.
  • Mr.C.Dineshbabu, “CFD Analysis and Performance on Heat Exchanger by Shell and Tube Method”, at International Conference on Intelligence in Industrial Automation (ICIIA’23) Velammal Institute of Technology on 05th April 2023.
  • Mr.E.Sivaprakash, “Increasing Efficiency of PV/T Collector by PCM”,   at 7th   International Conference on Engineering, Technology and Science Muthyammal College of Engineering 31st March 2023.
  • Mr.N.Kawin, “Performance Evaluation in Three types of Cyclone Seperator”,   at 7th   International Conference on Engineering, Technology and Science, Muthyammal College of Engineering 31st March 2023.
  • Mr.S.Mohankumar, “Root Cause Analysis: Improving Production Efficiency and Quality Control”,   at 7th   International Conference on Engineering, Technology and Science, Muthyammal College of Engineering 31st March 2023.
  • Mr.Ra.Aravind, “SRF 15 coupling pump End HMC Fixture”,   at 7th   International Conference on Engineering, Technology and Science, Muthyammal College of Engineering 31st March 2023.
  • Mr.J.Gunasekaran, “The Effect of flux core Arc Welding (FCAW) Processes on Different Parameters”,   at 7th   International Conference on Engineering, Technology and Science, Muthyammal College of Engineering 31st March 2023.
  • Mr.J.Mahendran, “Experimental and Investigation of E-Glass Fiber, Banana Fiber and Orange Peel Using Brake Pad”,   at 7th   International Conference on Engineering, Technology and Science, Muthyammal College of Engineering 31st March 2023.
  • Mr.S.Chandrakumar, “Mechanical Behaviour of Kneaf/Basalt Hybrid Fiber Composite Material”,   at SERB sponsored International Conference on Challenges, Oppurtunities and Future Roadmap of Smart Manufacturing, A.K.T Memorial College of Engineering and Technology 28th and 29th March 2023.
  • Mr.S.Chandrakumar, “Mechanical and Characterization of Kevlar/Epoxy Fiber with addition of Filler Material Composite”,   at SERB sponsored International Conference on Challenges, Oppurtunities and Future Roadmap of Smart Manufacturing,  A.K.T Memorial College of Engineering and Technology 28th and 29th March 2023.
  • Mr.R.Arivazhagan, “Implementation of ECU’s in CAN BUS using with Vector CANDB++”,   at International Conference onAdvanced Materials and Technologies for Industry 4.0 (ICAMT 4.0), Bannari Amman Institute  of Technology 23rd and 24th March 2023.
  • Mr.P.Raja, “Effect of Plasma Arc Welding in Various Materials” at International Conference onAdvanced Materials and Technologies for Industry 4.0 (ICAMT 4.0), Bannari Amman Institute  of Technology 23rd and 24th March 2023.
  • Mr.C.Dineshbabu, “Recurring Service Agreement” at 3rd International Conference on Advances in Management, Engineering and Technology (ICAMET 2023) RSP Conference Hub 25th and 26th March 2023.
  • Mr.J.Gunasekaran, “Recurring Service Agreement” at 3rd International Conference on Advances in Management, Engineering and Technology (ICAMET 2023RSP Conference Hub 25th and 26th March 2023.
  • Mr.S.Kumaravel, “Micro structural Characterization of Al/Cu Disimilar Metal prepared by Friction Stir Welding” at  International Conference on Advances in Mechanical and Civil Engineering (ICAMCE 2023), M.Kumarasamy College of Engineering, Karur 17th March 2023.
  • Mr.E.Sivaprakash, “Investigations on Wire cut Electric Discharge Machining of Stainless Steel” at International Conference on Advances in Mechanical and Civil Engineering (ICAMCE 2023),  M.Kumarasamy College of Engineering, Karur 17th March 2023.
  • Mrs.V.Selvam, “Machining of Textile parts using CNC Machine” at International Conference on Advances in Mechanical and Civil Engineering (ICAMCE 2023), M.Kumarasamy College of Engineering, Karur 17th March 2023.
  • Mr.S.Mohankumar, “Experimental Investigations of Machining parameters of CNC Milling” at International Conference on Advances in Mechanical and Civil Engineering (ICAMCE 2023), M.Kumarasamy College of Engineering, Karur 17th March 2023.
  • Mr.S.Chandrakumar, “Mechanical and Characterization of Kenaf/Basalt Hybrid Composites” at International Conference on Advances in Mechanical and Civil Engineering (ICAMCE 2023), M.Kumarasamy College of Engineering, Karur 17th March 2023.
  • Mr.S.Chandrakumar, “Delamination behaviour of Aramid Fiber Composites on Various matrix Materials” at International Symposium on Lightweight and Sustainable Polymeric Materials, LSPM, Thailand 17th February 2023.
  • Mr.S.Kumaravel, “Microstructural Characterization of High Entropy Alloys during Mechanical Alloying: A review” at DST-SERB Sponsered International Conference on Innovations in Science, Engineering and Technology for Sustainable Development (ISETSD 2023), Muthyammal Engineering College, Rasipuram 30th & 31st  January 2023.
  • Mr.S.Kumaravel, “A Review on Microstructural Evolution of Friction Stir Welding/Processing” at DST-SERB Sponsered International Conference on Innovations in Science, Engineering and Technology for Sustainable Development (ISETSD 2023), Muthyammal Engineering College, Rasipuram 30th & 31st  January 2023.
  • Mr.N.Sivashankar, “Electrochemical Micromachining on AZ31 Alloy using Sodium nitrate Electrolyte” at DST-SERB Sponsered International Conference on Innovations in Science, Engineering and Technology for Sustainable Development (ISETSD 2023), Muthyammal Engineering College, Rasipuram 30th & 31st  January 2023.
  • Mr.M.Maniyarasan, “Performance Analysis of Hybrid Composite Helmet” at DST-SERB Sponsered International Conference on Innovations in Science, Engineering and Technology for Sustainable Development (ISETSD 2023), Muthyammal Engineering College, Rasipuram 30th & 31st  January 2023.
  • Dr.P.Muthukumar, “Effect of Direct Particle Injection tool in Friction Stir Processess for Fabrication on Al/SiC Surface Coating” International conference on Future Technologies in Manufacturing, Automation, Design and Energy (ICoFT MADE 2022) at National Institute of Technology, Pondicherry, 14 th to 16 th December 2022.
  • Mr.E.Sivaprakash, “Study on the effects of PV Panel Coolingon Hydrogen Production Rate” International conference on Advanced Trends in Renewable Energy (ICATRE 2022) at Nehru Institute of Technology, 13 th to 14 th October 2022.
  • Dr.A.Nithya, “Green Nanotechnology for Sustainable Environmental Development” International conference on Technologies for Smart Green Connect Society – 2022 at Edwin Corporation, Dubai, 27 th to 29 th July 2022.

National Conferences

  • Mr.N.Ravikumar, “Analysis of Machining Parameters on Turning of Magnesium Alloy Coated Carbide Inserts” at First National Conference on Innovative Smart Technologies in Engineering and Management Sciences (I-STEMS 2023) Excel Engineering College, Namakkal on 06th April 2023.
  • Mr.N.Ravikumar, “Analysis of Machining Parameters on Turning of Magnesium Alloy Non Coated Carbide Inserts” at First National Conference on Innovative Smart Technologies in Engineering and Management Sciences (I-STEMS 2023) Excel Engineering College, Namakkal on 06th April 2023.
  • Mr.P.Raja, “Optimization of Machining parameters in CNC Turning of Mild Steel (SAE1018) ” at First National Conference on Innovative Smart Technologies in Engineering and Management Sciences (I-STEMS 2023) Excel Engineering College, Namakkal on 06th April 2023.
  • Mr.S.K.Karthikeyan, “Experimental Analysis and Drilling process parameters optimization on UHMWPE with Coated and Uncoated Drill Bits by using Taguchi Technique” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Mr.S.Kumaravel, “Characterization Study of High Entropy Alloy Powder Consolidation” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Dr.G.Saravanan, “Design and assemble of Fixture for Increasing Productivity by using Master CAM Programming” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Mr.V.Muthukumar, “Resistance Spot Welding of Dissimilar Metal Sheets” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Mr.J.Gunasekaran, “Plasma Arc Welding in Dissimilar Materials AISI 304 and Monel Alloy 400” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Mr.M.Maniyarasan, “Automatic Oil Spraying unit in Press shop” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Mr.R.Periyasamy, “Experimental Investigation and Turning process parameters Optimization on Hybrid AMMC with various Nose Radius” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Mr.J.Mahendran, “Optimization Parameters of CNC Milling Programming Machine on the Time, Process Time and effect on the Efficiency” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Mrs.V.Selvam, “Flux Cored Arc elding Process Parameter Optimization by using Taguchi L9 Design” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Mr.V.Muthukumar, “Experimental Investigation and Machining Character Analysis on OHNA by using Wirecut EDM” at National Conference on Mechatronics and Automation Systems (NCMAS 2023) Bannari Amman Institute of Technology, Sathiyamangalam on 17th March 2023.
  • Dr.D.Jagadeesh, “Design and Development of Hexacopter Drone for Health Care” at National Conference on Recent Advancement in Engineering and Technology (NCRAET’22) Paavai Engineering College, Namakkal on 11 th November 2022.
  • Dr.K.Periasamy, “Experimental Investigation on the Delamination Behaviour of Kevlar Fiber Composites during Drilling Process” at National Conference on Recent Advancement in Engineering and Technology (NCRAET’22) Paavai Engineering College, Namakkal on 11 th November 2022.
  • Mr.S.Chandrakumar, “Experimental Investigation of Thrust force and Torque in Chemically Treated Kevlar Fiber Composites during Drilling Process” at National Conference on Recent Advancement in Engineering and Technology (NCRAET’22) Paavai Engineering College, Namakkal on 11 th November 2022.

Academic Year  2021 - 2022 

International / National Journals 

  • Duraisamy Jagadeesh, Ramasamy Venkatachalam, Gurusamy Nallakumarasamy, “Experimental and numerical study of an overlay composite absorber plate material for a solar air heater”, Material Testing, vol. 63, issue no. 7, pp. 681-686
  • Dr.A.Nithya, “A Study on Customer Preferences and Effectiveness of Advertisement of Mattress”, Infokara Research, vol. 1o, issue no. 9, pp. 57-68
  • Mr.B.Babu, MrsV.Selvam, “Design and development of Power Generation from Speed pump”, International journal of multidisciplinary educational research, vol. 10, issue no. 6(2), pp. 101-104.
  • R. Karthik, K. Gopalakrishnan, R. Venkatesh, A. Mohana Krishnan & S. Marimuthu, “Influence of stir casting parameters in mechanical strength analysis of Aluminium Metal Matrix Composites (AMMCs)”, Elsevier – materials today proceedings, (online published)
  • Bhiksha Gugulothu, N. Nagarajan, A.Pradeep, G. Saravanan, S. Vijayakumar & Janardhana Rao, “Analysis of Mechanical Properties for Al-MMC Fabricated through an Optimized Stir Casting Process”, Journal of Nano materials, Vol. 2022, Article ID 2081189
  • A.Mohana Krishnan, P. Lakshmanan, K. Raju, J. Mahendran & R. Venkatesh, “Salt spray corrosion study on aluminium metal matrix composites (AMMCs) prepared by powder metallurgy route”, Elsevier – materials today proceedings, (online published)
  • A.Mohana Krishnan, M.Dineshkumar, S.Marimuthu, N.Mohan & R.Venkatesh, “Evaluation of mechanical strength of the stir casted Aluminium Metal Matrix composites (AMMCs) using Taguchi method”, Elsevier – materials today proceedings, (online published)
  • N.Santhosh, C.Dineshbabu & M.Srinivasan, “TRIZ based efficiency enhancement of point absorber wave energy converter”, Elsevier – materials today proceedings, (online published)
  • G.Selvakumar, K.Santhakumar, S.Sanjaykumar, C.Selvakumar & S.Siranjeevi, “Experimental investigation of face milling surface study on AA100 by using VMC”, International Journal for Research in Applied Science and Engineering Technology, Vol. 10, issue no. IV, pp.2853-2857

International Conferences

  • Dr.K.Periasamy, “Advances in Manufacturing Technology”, International conference on Advances in Manufacturing Technology at Chennai Institute of Technology on 25th & 26th March 2022.
  • Dr.K.Periasamy, “Performance of diesel engine using distilled tire oil blends with CEO2 nanoparticles”, at 3rd International conference on “INNOVATIONS IN THERMAL, MANUFACTURING, STRUCTURAL AND ENVIRONMENTAL ENGINEERING (ICITMSEE’22)”’, Kongunnadu College of Engineering and Technology on 22nd & 23rd April 2022.
  • Dr.G.Saravanan, “Physical model of circulating dry scrubber”, at 7th INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY Trichy Engineering College on 20th & 21st April 2022.
  • Dr.S.Gobinath, “Team Productivity & Strategies to improve performance”, at 3rd INTERNATIONAL CONFERENCE ON “Current scenario and challenges of management practices” Vijay Institute of Management on 21st November 2021.
  • Dr.A.Nithya, “Transforming our world sustainable development through seventeen goals”, at International conference on Redefining Business Models For Sustainable Development (ICRBMSD) Kristu Jayanti college, Bengaluru on 25th & 26th March 2022
  • Dr.A.Nithya’ “Ethical Issues in Management”, at 3rd INTERNATIONAL CONFERENCE ON “Current scenario and challenges of management practices” (ICCSCMP’21) Vijay Institute of Management on 21st November 2021.
  • Dr.A.Nithya, “Emphasis on total quality management”, ”, at 3rd INTERNATIONAL CONFERENCE ON “Current Scenario and Challenges of Management Practices” (ICCSCMP’21) Vijay Institute of Management on 21st November 2021.
  • Mr.S.K.Karthikeyan,” Analysis of metal contamination and performance of automobile lube oil”, at Virtual International Conference on Modelling, Simulation and Control (ICMSC 2022) Karpagam College of Engineering on 18th & 19th March 2022.
  • Mr.S.K.Karthikeyan,” Performance analysis of modified floating solar panel”, at virtual “International Conference on Technology Advancements in Mechanical Engineering (ICTAME 2022)” AMET University on 22nd & 23rd April 2022.
  • Mr.R.Arivazhagan, “Performance of diesel engine using distilled tire oil blends with CEO2 nanoparticles” at 3rd International Conference on “INNOVATIONS IN THERMAL, MANUFACTURING, STRUCTURAL AND ENVIRONMENTAL ENGINEERING (ICITMSEE’22)”, Kongunnadu College of Engineering and Technology on 22nd & 23rd April 2022.
  • Mr.R.Arivazhagan, “Performance of diesel engine using distilled tire oil blends with CEO2 nanoparticles” at virtual “International Conference on Technological Advancement in Mechanical Engineering(ICTAME 2022)” AMET University on 22nd & 23rd April 2022.
  • Mr.C.Dineshbabu, “Virtual reality flight simulator” at 2nd INTERNATIONAL CONFERENCE ON MECHATRONICS IN ENERGY AND ENVIRONMENT PROTECTION (ICMEEP 2021) Bammari Amman Institute of Technology on 10th November 2022.
  • Mr.C.Dineshbabu, “TRIZ based efficiency enhancement of point absorber wave energy converter” at 2nd INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS RESEARCH – 2021 (ICAMR 2.0) Bammari Amman Institute of Technology on 3rd & 4th December 2021.
  • Mr.C.Dineshbabu, “Prediction of weld strength and optimization of process parameters in FSW of UHMWPE”, at 3rd International Conference on “INNOVATIONS IN THERMAL, MANUFACTURING, STRUCTURAL AND ENVIRONMENTAL ENGINEERING(ICITMSEE’22)”, Kongunnadu College of Engineering and Technology on 22nd & 23rd April 2022.
  • Mr.S.Kumaravel, “Emerging trends in materials, computing and communication technology”, at 2nd International Conference on Emerging Trends in Materials, Computing and Communication Technologies ‘ICETMCCT 2021’Annai Vailankanni College of Engineering on 10th December 2021.
  • Mr.G.Selvakumar, “Evaluation of aluminium based composite materials reinforcement with TiC and Tio2”, at 4th INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING(ICAME 2022)”, SRM Institute of Science and Technology on 24th to 26th March 2022.
  • Mr.N.Sivashankar,” Performance of electrochemical micromachining of magnesium alloy through sodium nitrate electrolyte”, at 8th International and 29th All India Manufacturing Technology, Design and Research Conference PSG College of Technology on 9th to 12th December 2021.
  • Mr.S.Chandrakumar,” Design and development of AC duct using classrooms in CFD method”, at CSIR – FUNDED HYBRID CONFERENCE ON SUSTAINABLE MATERIALS & ADVANCES IN RENEWABLE TECHNOLOGIES St.Mother Theresa Engineering College on 29th & 30th April 2022.
  • Mr.M.Dineshkumar,” Design and analysis of drill jig and fixture for mass manufacturing process”, at 3rd International Conference on “INNOVATIONS IN THERMAL, MANUFACTURING, STRUCTURAL AND ENVIRONMENTAL ENGINEERING (ICITMSEE’22)”, Kongunnadu College of Engineering and Technology on 22nd & 23rd April 2022.
  • Mr.K.Gopalakrishnan, “The Weld strength evaluation and radiography test on AA2024 by using GTAW process”, at Virtual International Conference on Modelling, Simulation and control (ICMSC 2022) Karpagam College of Engineering on 18th & 19th March 2022.
  • Mr.P.Raja, “Experimental investigation of flow visualization in see through cyclone separator”, at 7th INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY Trichy Engineering College on 20th & 21st March 2022.
  • Mr.P.Raja, “Manufacturing process segregation of cost reduction linear Cartesian robot long traverse”, at virtual “International Conference on Technological Advancements in Mechanical Engineering(ICTAME 2022)” AMET University on 22nd & 23rd April 2022.
  • Mr.L.Devakumar,” Macro and tribological investigation of hybrid metal matrix connecting rod on SI engine”, at virtual International Conference on Modelling, Simulation and Control(ICMSC 2022)Karpagam College of Engineering on 18th & 19th March 2022.
  • Mr.J.Mahendran, “Macro and tribological investigation of hybrid metal matrix connecting rod on SI engine”, at virtual International Conference on Modelling, Simulation and Control (ICMSC 2022)Karpagam College of Engineering on 18th & 19th March 2022.
  • Mr.R.Prakash,” Friction stir welding with dissimilar aluminium alloy of combination with AA6451-AA7020”, at virtual “International Conference on Technological Advancements in Mechanical Engineering (ICTAME 2022) Trichy Engineering College on 20th & 21st March 2022.
  • Mr.R.Prakash, “Fabrication of auto components by using turning method in CNC machine”, at 7th INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AMET University on 22nd & 23rd April 2022.

National Conferences

  • Dr.D.Jagadeesh, “Cross over studys and flow visualization of 500MW power plant duct from air preheater to ID fan including electrostatic precipitator”, at National Conference on Advance in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Dr.G.Saravanan,” CFD analysis of geometrical modified thermosiphons”, at 9th National Conference On Recent Advancements in Geotechnical Engineering(NCRAG’22) Karpagam Academy of Higher Educationon 6th April 2022.
  • Dr.V.Gopinath, “Evaluation of mechanical behavior of aluminium metal matrix composite (Al 6063 + Sic+Zn)”, at National Conference On Advance in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.R.Arivazhagan,” An investigation on cut quality of aluminium matrix composites cut by abrasive water jet”, at National Conference On Mechatronics and Automation Systems(NCMAS 2022) Bannari Amman Institute of Technology on 21st April 2022.
  • Mrs.V.Selvam,” Influence of combined Egr and injection timing on diesel operation fueled with desulphurized tire oil”, at National Conference On Advance in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mrs.V.Selvam,” Control and analysis of geometric dimension and tolerance in CNC turning and milling operations”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.M.Ravikumar,” Comparison study of symmetric and Asymmetric reflection compound collector for hot water generation”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.R.Karthik, “Design and optimization of bicycle crank arm”, at National Conference On Advances in Mechanical Sciences (AIMS 2022)Mahendra Institute of Technology on 18th March 2022.
  • Mr.R.Karthik, “Evaluation of machining behaviors of metal matrix composite (Al+SiC+Mg)”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.E.Sivaprakash,” Effect of PV panel cooling”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.Ra.Aravind, “Influence of combined Egr and injection timing on diesel operation fueled with desulphurized tire oil”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.S.Mohankumar,” Work related musculoskeletal disorders among poultry farming workers: An Ergonomics intervention – A Pre- Post design analysis”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.S.Mohankumar, “Experimental investigation on electrical discharge drilling (EDD) for SS 312 material to improve metal removal rate, tool wear rate and geomentrical error using diagonal shaped copper electrode”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.N.Sivashankar,” Investigation of machining parameters of Magnesium AZ31 alloy micro ECM process through critic acid (C6H8O7)”, at National Conference On Advances in Mechanical Sciences (AIMS 2022)Mahendra Institute of Technology on 18th March 2022.
  • Mr.V.Muthukumar,” Heat Treatment analysis of MS shaft ENB and EN19T steel to improve hardness”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.A.Natarajan,” MPI Testing on Ferromagnetic Materials”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.A.Natarajan,” Design and implementation of cone pipe piercing tool”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.R.Periyasamy,” Experimental study on double pass solar air heater with absorber plate”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.R.Periyasamy, “Vehicle tyre rolling friction and tensile test analysis”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.S.Chandrakumar, “CFD Analysis of 500MW air preheater to ID fan inlet flue gas duct cross over studies”, at National Conference On Mechatronics and Automation Systems (NCMAS 2022) Bannari Amman Institute of Technology on 21st April 2022.
  • Mr.N.Kawin,” Experimental and effects of various end point angle of the SS304 drills performs in drilling”, at National Conference On Mechatronics and Automation Systems (NCMAS 2022) Bannari Amman Institute of Technology on 21st April 2022.
  • Mr.N.Ravikumar, “Optimization of process parameters of mil steel (EN24) on lathe machines”, at National Conference On Advances in Mechanical Sciences (AIMS 2022) Mahendra Institute of Technology on 18th March 2022.
  • Mr.M.Dineshkumar, “Study the influence of SiO2 nanoparticles on diesel and the blend on diesel engine”, at 9th National Conference On Recent Advancements in Geotechnical Engineering (NCRAG’22) Karpagam Academy of higher education on 6th April 2022.
  • Mr.K.Gopalakrishnan,” Experimental investigation and optimum overcut in WEDM process on AL6061+WC metal matrix composites”, at National Conference On Mechatronics and Automation Systems (NCMAS 2022) Bannari Amman Institute of Technology on 21st April 2022.
  • Mr.C.Dineshbabu,” Investigation on surface finish EN8 material with respect to machining parameters in soft and hardened conditions”, at National Conference On Mechatronics and Automation Systems (NCMAS 2022) Bannari Amman Institute of Technology on 21st April 2022.
  • Mr.C.Dineshbabu,” Prediction of weld strength and optimization of process parameters in FSW of UHMWPE”, at National Conference On Mechatronics and Automation Systems (NCMAS 2022) Bannari Amman Institute of Technology on 21st April 2022.

Academic Year  2020 - 2021 

International / National Journals 

  • Mr.N.Sivashankar, Dr.K.Viswanathan, Dr.K.Periasamy, Dr.R.Venkatesh and Mr.S.Chaandrakumar,” Multi objective optimization of performance characteristics in drilling of Mg AZ61 using twist end mill drill tool”, Elsevier – materials today proceedings. Vol 37, pp.214-219.
  • Dr.D.Jagadeesh, Mr.M.Vivekanandhan, Mr.A.Natarajan and Mr.S.Chandrasekar, “Experimental conditions to identify the ideal shape of dryer investigation of Six shapes of solar green house dryer in no load”, Elsevier – materials today proceedings, Vol 37, pp. 395-403.
  • Mr.V.Gopinath, Mr.R.Perisamay, Mr.G.Selvakumar, Mr.RA.Kingslly and Mr.S.Logeswaran,” Evaluation of the effect of gryogenic treatment of HSS drills in drilling SS310”, Elsevier – materials today proceedings. Vol 37, pp.449-452
  • Mr.Ra.Aravind, Mr.V.Muthukumar, Mr.S.Kumaravel and Mr.E.Sivaprakash,” Performance assessment of 2X90 TPH (AFBC) boiler and study of Hp heater”, Elsevier – materials today proceedings. Vol 37, pp.404-408
  • Mr.A.Kannan, Mr.R.Mohan, Dr.R.Vishwanathan and Mr.N.Sivashankar,” Experimental Investigation on Surface Roughness Tool Wear and Cutting force in turning of Hybrid (Al7075+Sic+Gr) Metal Matrix Composites”, Journal of Materials Research and technology, Vol 9., No. 6, pp 16529-16540.
  • Mr.B.Babu and Mr.S.K.Karthikeyan,” Fabrication of Mechanized Conveyor using Four Bar Mechanism, Stard Reearch”, Vol.7, No.11 pp. 316-319.
  • Mr.B.Babu and Mr.N.Mohan, “Defects reduction in a pump manufacturing industry using Sic Sigma methodologies”, Vol. 6, No. 1, pp. 805-811.
  • Mr.M.Vivekanandhan, Dr.K.Periasamy, Mr.C.Dineshbabu ,Mr.G.Selvakumar and Mr.R.Arivazhagan,” Experimental and CFD investigation of six shapes of solar greenhouse dryer in no load conditions to identify the ideal shape”, Elsevier – materials today proceedings, Vol.37, pp. 1409-1416
  • Mr.M.Vivekanandhan, Dr.D.Jagadeesh, Mr.A.Natarajan, Mr.N.Mohan and Mr.M.Dineshkumar, “Experimental and CFD Investigation of Fully Developed Flow Solar Air Heater”, Elsevier – materials today proceedings. Vol.37, pp. 2158-2163.
  • Mr.M.Vivekanandhan, Dr.R.Venkatesh, Mr.R.Periyasamy, Mr.S.Mohankumar and Mr.L.Devakumar,” Experimental and CFD Investigation of Helical Coil Heat Exchanger with Flower Baffle”, Elsevier – materials today proceedings. Vol.37, pp. 2174-2182
  • Mr.M.Vivekanandhan, Dr.G.Saravanan, Mr.V.Vijayan, Mr.K.Gopalakrishnan and Mr.J.Phani Krishna,” Experimental and CFD Investigation of Spiral Tube Heat Exchanger”, Elsevier – materials today proceedings, Vol.37, pp.3689-3696.
  • Ganapathi Saravanan, Ramasamy Venkatachalam and Gurusamy Nallakumarasamy,” Experimental assessment on the impact of cutouts on a hollow shaft system”, Materials Testing, Vol.11, issue 62, pp1143-1146.
  • Mr.N. Ravikumar, Mr.P. Sharmila, Mr.S.P. Premnath,Mr.Rajakumar, Mr.S. Rai, J. Mohammed Feros Khan and Mr.Ram Subbiah,” Performance and optimization of parameters on rubber punching process”, Elsevier – materials today proceedings. (Published in online)
  • Dr.R.Viswanathan, Mr.K.G.Saravanan, Mr.J.Balaji,Mr.R.Prabu and Mr.K.Balasubramani,” Optimization of wear and friction parameters in Aluminium7075 Hybrid Composite”, Elsevier – materials today proceedings. (Published in online)
  • Mr.R.Karthik, Dr.R.Viswanathan, Mr.J.Balaji, Mr.N.Sivashankar and Mr.R.Arivazhagan, “Optimization of WEDM Parameters for machining of AZ31B Mg Alloy using Taguchi Method”, Materials Science and Engineering.

International Conferences

  • Dr.R.Venkatesh,” Optimization and Experimental investigation of spiral coil heat exchanger under TEMA standards”, International Virtual Conference of Recent Innovations in Science at M.Kumarasamy College of Engineering on 3rd & 4th July 2020.
  • Dr.R.Venkatesh,” Performance of temperature of a room by using solar chimney”, International Virtual Conference of Recent Innovations in Science, Engineering and Technology at M.Kumarasamy College of Engineering on 3rd & 4th July 2020.
  • Dr.G.Saravanan,” Performance Analysis of Shell and Tube Heat Exchanger”, International Conference on New Scientific Creations in Engineering and Technology at Nadar Saraswathi College of Engineering and Technology on 19th March 2021
  • Dr.G.Saravanan,” Experimental investigation and predict the GTAW process parameter on Al5052”, International Virtual Conference of Recent Innovations in Science, Engineering and Technology at M.Kumarasamy College of Engineering on 3rd & 4th July 2020.
  • Dr.V.Gopinath,” Study of various methods to improve the gas turbine plant efficiency”, International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mr.S.K.Karthikeyan,” Thermal analysis of Semi pyramidal acrylic type solar still and semi pyramidal glass type solar still”, International Conference on New Scientific Creations in Engineering and Technology at Nadar Saraswathi College of Engineering and Technology on 19th March 2021
  • Mr.S.K.Karthikeyan,” Heat transfer analysis of Biofilmed pipe line”, International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mrs.V.Selvam,” Electrochemical brakes stop motion using Electromagnetic force to apply mechanical resistance”, International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mr.K.Balasubramani,” Optimization of catalytic converter emission performance for Genset diesel engine with and without fuel additives”, International Virtual Conference of Recent Innovations in Science at M.Kumarasamy College of Engineering on 3rd & 4th July 2020.
  • Mr.S.Kumaravel,” Experimental Investigation of Electrochemical machining process on copper alloy by varying its process parameters”, International Conference on Emerging Approaches in Mechanical & Automobile Engineering at Arasu Engineering College on 17th and 18th March 2021.
  • Mr.S.Kumaravel,” Performance Enhancement of Solar PV panel using appropriate Cooling system”, International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mr.G.Selvakumar,” Regenerative braking in electric bus”, International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mr.K.Gopalakrishnan,” Fabrication of pneumatic welding machine”, International Conference on New Scientific Creations in Engineering and Technology at Nadar Saraswathi College of Engineering and Technology on 19th March 2021
  • Mr.K.Gopalakrishnan,” Power generation from exhaust gas”, International Conference on Engineering and Technology at Cauvery College of Engineering and Technology on 18th & 19th March 2021.
  • Mr.N.Mohan,” Identification of the various common collection cause factors and analysis of the centrifugal pump”, International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mr.P.Raja,” Experimental Studies on VCR diesel engine with mafuna biodiesel”, International Conference on Engineering and Technology at Cauvery College of Engineering and Technology on 18th & 19th March 2021
  • Mr.Ra.Aravind,” Computational analysis of exhaust system in diesel engine on thermal laboratory”, International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mr.E.Sivapraksh,” Studies on bifacial solar panels with sun tracking system” , International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mr.E.Sivapraksh,” Performance analysis of asymmetric compound parabolic concentrator”, International Conference on New Scientific Creations in Engineering and Technology at Nadar Saraswathi College of Engineering and Technology on 19th March 2021
  • Mr.S.Mohankumar,” Ergonomic risk factor in poultry farming and prevalence of musculoskeletal disorder”, International Conference on Engineering and Technology at Cauvery College of Engineering and Technology on 18th & 19th March 2021.
  • Mr.A.Natarajan,” Optimization characteristics and microstructure analysis of Al7075 hybrid metal matrix composite by using abrasive water jet machining”, International Conference on Emerging Approaches in Mechanical & Automobile Engineering at Arasu Engineering College on 17th and 18th March 2021.
  • Mr.A.Natarajan,” Emission control analysis on Bs-vi diesel engine in heavy vehicle”, International Conference on Engineering and Technology at Cauvery College of Engineering and Technology on 18th & 19th March 2021.
  • Mr.M.Dineshkumar,” Wear properties of Hard facing deposits on mild steel using gas tungsten arc welding (GTAW)”, International Virtual conference on Emerging Trends in Mechanical and Automobile Engineering at J.K.K.Munirajan College of Technology at 19th April 2021
  • Mr.M.Dineshkumar,” Evaluation of geometrical and machining process parameters optimization on EN 24 by using VMC”, International Virtual Conference of Recent Innovations in Science, Engineering and Technology at M.Kumarasamy College of Engineering on 3rd & 4th July 2020.
  • Mr.V.Muthukumar,” Clean iron casting production”, International Virtual Conference of Recent Innovations in Science, Engineering and Technology at M.Kumarasamy College of Engineering on 3rd & 4th July 2020.

National Conferences

  • Dr.R.Venkatesh,” Double pass solar air heater using aluminium absorber plate with chimney”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Dr.S.Gobinath,” Design and fabrication of Ground nut Sheller removing machine”, Virtual National Conference on Green Mechatronics Systems – 2021 at Hindusthan College of Engineering and technology on 31st March 2021
  • Dr.K.Periasamy,” Implementation of multimode vibration absorbing with electro magnetic damping”, Virtual National Conference on Innovations in Electrical Power and Green Energies at M.Kumarasamy College of Engineering on 24th March 2021
  • Dr.K.Periasamy,” Design and fabrication of robot with crane system”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Dr.D.Jagadeesh,” Design and fabrication of modern Egg incubator”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Dr.D.Jagadeesh,” Solar green house dryer with combination of single pass solar air heater”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Dr.G.Saravanan,” Experimental CFD investigation of TEMA shell and tube heat exchanger”, Virtual National Conference on Green Mechatronics Systems - 2021 at Hindusthan College of Engineering and technology on 31st March 2021
  • Dr.G.Saravanan,” Experimental analysis of thermal conductivity of fused Zirconia alumina composite”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Dr.V.Gopinath,” Cryo drilling”, National Level Conference on Renewable Energy System & Project Expo at Aiswarya College of Engineering and technology on 13th March 2021
  • Mr.R.Arivazhagan,” Analysis for mechanical behavior of jute fibre aluminum powder reinforced hybrid polymer composite”, National Level Virtual Conference (ELECTTRICO-2k21) at v Karpagam Academy of Higher Education on 26th March 2021
  • Mr.S.K.Karthikeyan,” Automatic railway track crack detection vehicle”, National Level Virtual Conference (ELECTTRICO-2k21) at Karpagam Academy of Higher Education on 26th March 2021
  • Mr.K.Balasubramani,” Fabrication of high performance electrical bycycle”, National Conference on Green Mechatronics System at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.K.Balasubramani,” Design and fabrication of crusher machine for plastic waste”, National Level Virtual Conference (ELECTTRICO-2k21) at Karpagam Academy of Higher Education on 26th March 2021
  • Mr.K.Balasubramani,” Experimental studies on a diesel engine using mahua oil performance, combustion and emission analysis”, National Conference on Green Mechatronics System at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.C.Dineshbabu,” Motorised industrial trolly”, Virtual National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.C.Dineshbabu,” Automatic water level sensing crane”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Mr.S.Kumaravel,” Storage type indirect hot water system b y using flat plate collector”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Mr.S.Kumaravel,” Performance enhancement of solar panel using appropriate cooling system”, National Conference on Emerging Trends in Mechanical Engineering and its Applications at SRM institute of science and technology on 10th April 2021
  • Mr.R.Periyasamy,” Effect of injection pressure on diesel engine using Mahuva Biodiesel”, Virtual National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.R.Periyasamy,” Single pass solar air heater by using copper plate”, Virtual National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.S.Chandrakumar,” Ignition control system in Engine using seat belt” Virtual National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.S.Chandrakumar,” Double solar air heater using copper plate with vanes & GD lates”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Mr.S.Chandrakumar,” Mechanical behavior of (Aramid) kevlar fiber composite”, Virtual National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.J.Mahendran,” Vehicle tyre rolling resistance and load speed performance test analysis”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Mr.J.Mahendran,” Solar thermo electric refrigeration”, National Level Virtual Conference (ELECTTRICO-2k21) at Karpagam Academy of Higher Education on 26th March 2021
  • Mr.R.Karthik,” Study the microstructure properties of AZ318 Magnesium alloy by Nano coating”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Mr.M.Praveen,” Solar operated motorized reciprocating pump”, Virtual National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.M.Praveen,” Comparative analysis of chromium coated HSS tool and non coated HSS tool”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Mr.Ra.Aravind,” Spiral baffle design in double pipe heat exchanger with CFD analysis”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Mr.Ra.Aravind,” Experimental analysis of novel cylindrical shape solar still with a forced collection system”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Mr.S.Mohankumar,” Impllementation of multimode vibration absorbing with electromagnetic damping”, Virtual National Conference on Innovations in Electrical Power and Green Energies at M.Kumarasamy College of Engineering on 24th March 2021
  • Mr.G.Selvakumar,” Design of oil cooler plate and fin assembly using LCA”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Mr.M.Dineshkumar,” Design and fabrication of multipurpose agricultural equipment”, equipment’Virtual Conference on Smart Computing & Advanced Communication at PSNA college of engineering and technology on 31st March 2021
  • Mr.A.Natarajan,” Exhaust gas breaking system”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Mr.A.Natarajan,” Fabrication of Air leakage detector in two wheeler”, Virtual National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.E.Sivaprakash,” Develop and manufacturing of solar panel with sun position tracking system”, Virtual National Conference on Design, Manufacturing and Automation at SRM TRP Engineering College on 15th April 2021
  • Mr.E.Sivaprakash,” Glazing solar heat collector for agricultural products”, Virtual National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.N.Mohan,” Experimental investigation of aluminium, Nickel and MOS 2 composite materials”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Mr.V.Muthukumar,” Fabrication and characterization of banana coir steel fiber composites”, National Conference on Green Mechatronics Systems at Hindusthan College of Engineering and technology on 31st March 2021
  • Mr.N.Sivashankar,” Machinability study of AZ31 by using ECM process”, National Web Conference on Advances in Science, Engineering and Technology at Jai Shriram Engineering College on 26th March 2021
  • Dr.A.Nithya, “Comparative Analysis of chromium Coated HSS tool and Non coated HSS Tool”, National level Conference on Emerging Trends in Engineering Design and Manufacturing at Hindusthan Institute of technology on 25th March 2021
  • Dr.A.Nithya, “Green Mechatronics system”, Virtual National Conference on Green Mechatronics Systems at at Hindusthan College of Engineering and technology on 31st March 2021.

 Academic Year  2019 - 2020

International / National Journals

  • Venkatesh.R,2020” Combustion analysis of biodiesel blends with different piston geometries”, Journal of Thermal Analysis and Calorimetry, (Published in online)
  • Chandrakumar.S, Periasamy.K, Sivashankar.N, Vairamani.V,2020” Effect of Thurst Force and Torque Analysis on Chemically Treated Kevlar Reinforced Composites during Drilling Process”, International Journal of Engineering and Advanced Technology, Vol.9 issue No. 3, pp-3101-3106
  • Ganapathy Saravanan, Ramasamy Venkatachalam and Gurusamy Nallakumarasamy, 2019” Effect of Cut- outs on the vibrational characteristics of a hollow shaft system”, Materials Testing, Vol.61., No. 7, Pages 652-658.
  • Sathish Thanikodi, DineshKumar Singaravelu, Chandramohan Devarajan, Vijayan Venkataraman, Venkatesh Rathinavelu, 2019” Tlonn for the Effective Prediction of Heat Transfer Rates in Tube Heat Exchanger”, Thermal Science, Vol.9., No. 12, Pages 922-927.
  • Gopinath.V, Selvakumar.G and Periyasamy. R, 2019” Performance and Emission Characteristics of Preheating Corn Oil Methyl Ester in CI Engine”, Mechanika, Vol.25., No. 5 Pages 413-418.
  • Gobinath Velu Kaliyannan,Senthil Velmurugan Palanisamy,Manivasakan Palanisamy, Mohankumar Subramanian,Prabhakaran Paramasivam Rajasekar Rathanasamy, 2019” Development of sol-gel derived gahnite anti-reflection coating for augmenting the power conversion efficiency of polycrystalline silicon solar cells”, Materials Science-Poland, Vol.37, No. 3, pp. 465-472
  • A.Natarajan , Dr.R.Venkatesh , Dr.S.Gobinath,L.Devakumar and K.Gopalakrishnan, 2019 “CFD Simulation of Heat Transfer Enhancement in Circular Tube With Twisted Tape Insert by Using Nanofluids” Elsevier – materials today proceedings, 2214-7853/2019 Elsevier Ltd.
  • V.Vairamani, N.Mohan,, Dr.Venkatesh, M.Sakthivel and S.K.Karthikeyan, 2019 “Optimization And Microstructure Analysis of Corten  Steel Joint in MAG Welding by Post Heat Treatment”, Elsevier – materials today proceedings. 2214-7853/2019 Elsevier Ltd.
  • Kawin.P, Dr.D.Jagadesh,G.Saravanan and K.Periasamy, 2019 “Optimization of SugarCane BAGGASSE Ash with Al2Si10Mg alloy Comoposite”, Elsevier – materials today proceedings. 2214-7853/2019 Elsevier Ltd.
  • Mohankumar. S ,Aravind. Ra,SelvaKumar. G,Raja. P and Selvam. V, 2019 “Experimental Investigation on the Tribological -Mechanical Properties of B4c And Fly Ash Reinforced Al 359 Composites’. 2214-7853/2019 Elsevier Ltd.
  • C.Dineshbabu, R.Arivazhagan Dr.R.Venkatesh K.Balasubramani and R.Periyasamy, 2019” Investigation of Aspect Ratio and Friction on Barrelling in Billets of Aluminium Upset Forging”, Elsevier – Materials Today Proceedings”, 2214-7853/2019 Elsevier Ltd.
  • Selvakumar.G, Mahendran.J, Thirunavukkarasu.R, Periyasamy. R, Gopinath.V,2019” Emission Characteristics of Preheating Corn oil Biodiesel Blend in CI Engine”, International Journal of Recent Technology and Engineering, vol.8, No. 4,pp.8251-8254.
  • V, Vivekanadan.M, Venkatesh.R, Rajaguru.K and Godwin Anthony.A 2020, “CFD Modelling and analysis of two phase vapor separator” Journal of thermal Analysis and Calorimetry. {Online Published}
  • Dr.A.Nithya AP, Mechanical Engineering presented paper on “A Study on customer’s Perception and special Emphasis of Emerging Market on Bajaj Two Wheeler” in the International Journal on Management Research, Vol11,Issue no.3, March 2020,ISSN: 2229-6883
  • Periasamy.K, Sivashankar.N, Chandrakumar.N and Viswanathan R 2020 “Measurement of Friction and wear in Aluminium Alloy Al7075/Sic and Gr Processed by Friction Stir Method” International Journal of Innovation Technology and Exploring Engineering, Vol.9, pp278-281

International Conferences

  • Gopalkrishnan, “Efficiency Analysis of Turbine and Failure analysis of High Pressure Feed water”, 2nd International Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology on 13th  march 2020.
  • M.Praveen, “Improving Recovery boiler Efficiency using Automatic Air Port Rodding”, 6th International Conference on Engineering and Technologyat Selvam College of Technology, Namakkal on 04 & 05thMarch 2020
  • Raja, “An Experimental Stress Analysis on 60˚ Metre Bend” , 2nd International Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology on 13th March 2020.
  • Balasubramani, “ Active Brake Torque Vectoring in Differential Unit” 6th International Conference on Engineering and Technoogy (ICET-2020) at Selvam College of Technology, Nammakkal on 04th & 05th  March 2020.
  • M.Dinesh Kumar, “Design and CFD Analysis of intake Manifold of four Cylinder Engine” 6th International Conference on Engineering and Technoogy (ICET-2020) at Selvam College of Technology, Nammakkal on 04th & 05th March 2020
  • C.DineshBabu, “Reduction of Heat in Railway Axle Bearing”  6th International Conference on Engineering and Technology (ICET-2020) at Selvam College of Technology, Nammakkal on 04th & 05th March 2020
  • S.Mohan Kumar “Experimental Investigation and Macro Property Analysis on AL6282 Metal Matrix Reinforced with TIO2  6th International Conference on Engineering and Technology at Selvam College of Technology on 04th & 05th  March 2020
  • G.Selvakumar “Modest Try to Add First Grade Fuel extraction from waste tire Scraps to Diesel Engine”, 6th International Conference on Engineering and Technology  at Selvam College of Technology on 04th  & 05th  March 2020
  • G.Selvakumar “Measurement of MRR and Circularity Error in Magnesium Alloy AZ61D during drilling” 6th International Conference on engineering and Technology  at Selvam College of Technology on 04th  & 05th  March 2020
  • Nithya “business Management and its Market Strategies” International Conference on “Catalysis in forming Business Management-ICCFBM’20” at Vijay Institute of Management on 7 Feb 2020.
  • A.Nithya , “Managing Business Technology and its Innovations” International Conference on “Catalysis in forming Business Management-ICCFBM’20” at Vijay Institute of Management on 7 Feb 2020
  • A.Natarajan, “Development of Quality in Casing by minimizing Defects ” , 2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology on 13th  March 2020
  • R.Thirunavukkarasu “Effect of Nano Solid Additives to Diesel Engine to Improve the Engine Performance ”, 2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology held on 13th  March 2020
  • P.Raja, “ Problems in End hole Drilling of different length of Conveyor Roller Idler Shaft ”, 2nd national Conference on Recent trends in Engineering & Technology  at VetriVinayaha College of Engineering & Technology on 13th  March 2020
  • S.K.Karthikeyan, “ Experimental Analysis and Optimization of parameter in WEDM on SS304”,  2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology on 13th  March 2020
  • Arivazhagan, “Performance and characteristics comparsion of diesel & Bio fuels”, 2nd National Conference on Recent trends in Engineering & Technology on VetriVinayaha College of Engineering & Technology held on 13th March 2020.
  • N.Mohan, “NDT Evaluation and comparative analysis of steel with/without post wed heat treatment”,  2nd National Conference on Recent trends in Engineering & Technology on VetriVinayaha College of Engineering & Technology on 13 March 2020
  • S.Chandrakumar, “Friction Stir Welding on AL-6082 by using taper cylindrical tool profile”, 2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology held on 13th March2020
  • R.Venkatesh, “ Friction Stir Welding on AL-6082 by using taper cylindrical tool profile”,  2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology on 13th March 2020
  • N.Ravikumar, “An Experimental Array of Pressure Drop for fluid flow mitre bend in various pipes”,  2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology held on 13th March 2020
  • V.Selvam, “Design and Analysis of Rotor in motor”, 2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology on 13th March 2020
  • R.Periyasamy, “ Design and Analysis of Foot Valve in Pump”,  2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology  on 13th  March 2020
  • S.Gobinath, “Optimization of catalytic Convertor for Diesel Engine applications with/ without thermal coatings”, in 2nd National Conference on Recent trends in Engineering & Technology at VetriVinayaha College of Engineering & Technology  on 13th  March 2020
  • C.Dineshbabu “Poultry egg collection ‘C’ Type Conveyor System using Geneva Mechanism”, National Conference organized St Joseph’s College of Engineering and Technology, Thanjavur on 13th March 2020
  • A.Natarajan, “A Novel Approach for Increasing Efficiency of Solar and Heating by improving flow distribution using guide vanes and Flow Restriction”, National Level Conference on “Advance in Mechanical Science-AIMS 2020”  at Mahendra Institute of Technology, Nammakkal on 14th  February 2020
  • R.Karthik, “Helical Coil Heat Exchanger with Flower Shaped Baffle Plates to improve residence time inside shell” in National Level Conference on “Advance in Mechanical Science-AIMS 2020”  at Mahendra Institute of Technology, Nammakkal on 14th  February 2020
  • S.Mohan Kumar  “Improvisation of Scale free Reheating in steel Billets” 3rd National conference on current & Emerging Process technology (CONCEPT 2020)  at Kongu Engineering College, Erode on 25th  Jan 2020
  • K.Periyasamy,  “Helical Coil Heat Exchanger with Flower Shaped Baffle Plates to improve residence time inside shell” ,National Level Conference on “Advance in Mechanical Science-AIMS 2020” at Mahendra Institute of Technology, Nammakkal on 14th  February 2020
  • A.Nithya “The Impact Total Quality Management on Organisation performance”  National Level Conference on “Advance in Mechanical Science-AIMS 2020” at Mahendra Institute of Technology, Nammakkal on 14th  February 2020
  • V.Selvam “The Impact Total Quality Management on Organisation performance” National Level Conference on “Advance in Mechanical Science-AIMS 2020” atMahendra Institute of Technology, Nammakkal on 14th  February 2020
  • E.Sivaprakash “Belt & Screw Sorting Machine” , 9th National Level Conference on Renewable Energy system Project Expo “ELECTRONIKA-2K20” at Aishwarya College of Engineering and Technology, Erode on 13th  March 2020
  • Ra.Aravind “Performance assessment of 2× 90TPH (AFBC) Boiler and study of HP Heater”9th National Level Conference on Renewable Energy system Project Expo “ELECTRONIKA-2K20”  at Aishwarya College of Engineering and Technology, Erode on 13th  March 2020
  • N.Sivashankar, “Development of Quality Cost system in Cast Iron Foundries”,  2nd National Conference on Recent Trends in Engineering & Technology  at VetriVinayaha College of Engineering & Technology on 13th  March 2020
  • V.Muthukumar, “ Method of Improving Boiler Efficiency”, 2nd National Conference on Recent Development in Automobile and Mechanical Engineering (RDAME’20)  at Easwari Engineering College, Chennai on 11th  March 2020
  • A.Arivazhagan, “Experimental Investigation and Optimization Machining parameter for EDM using Copper Electrode on D2 Steel”,  9th National Level Conference on Renewable Energy system Project Expo “ELECTRONIKA-2K20”  at Aishwarya College of Engineering and Technology, Erode on 13th  March 2020
  • R.Prakash, “Comparative Mechanical Properties of AL- Metal Matrix Connecting ROD with Various reinforcement”, 9th National Level Conference on Renewable Energy system Project Expo “ELECTRONIKA-2K20”  at Aishwarya College of Engineering and Technology, Erode on 13th  March 2020

Academic Year  2018 - 2019

International / National Journals

  • Viswanathan, R, Sivashankar, N, Chandrakumar, S and Karthik, R 2019, ‘Improving Corrosion Resistance of Magnesium Alloy for Aerospace Applications’, International Journal of Mechanical and Production Engineering Research and Development, vol. 9, no. 3, pp. 769-774.
  • Periasamy, K, Jayaraman, M and Rajkumar, S 2019, ‘Mechanical Properties of 7075-t6 Aluminium Alloys Surface Hybrid Composites Synthesized by Friction Stir Processing’, International Journal of Rapid Manufacturing, vol. 8, no. 1/2 pp. 52-64.
  • Vivekanandan, M, Venkatesh, R, Sathish, T, Dinesh, S, Ravichandran, M and Vijayan, V 2018, ‘Pressure Vessel Design Using PV-ELITE Software with Manual Calculations and Validation by FEM’, Journal of Engineering Technology, vol. 8, no. 1, pp. 425–433.
  • Venkatesh, R, Vijayan, V, Parthiban, A, Sathish, T and Siva Chandran, S 2018, ‘Comparison of Different Tool Path in Pocket Milling’, International Journal of Mechanical Engineering and Technology, vol. 9, no. 12, pp. 922–927.
  • Vijayan, V, Parthiban, A, Sathish, T, Siva Chandran, S and Venkatesh, R 2018, ‘Performance Analysis in End Milling Operation’, International Journal of Mechanical Engineering and Technology, vol. 10, no. 11, pp. 2263–2271.
  • Parthiban, A, Sathish, T, Siva Chandran, S, Venkatesh, R and Vijayan, V 2018, ‘Optimization of CO2 Laser Cutting Parameters on Austenite Stainless Steel Using Grey Relational Analysis’, International Journal of Mechanical Engineering and Technology, vol. 10, no. 1, pp. 984-992.
  • Jagadeesh, D, Venkatachalam, R and Nallakumarasamy, G 2018, ‘Transient Computational Fluid Dynamics Investigations on Thermal Performance of Solar Air Heater with Hollow Vertical Fins’, International Scientific Journal-Thermal Science, vol. 22, no. 6, pp. 2389-2399.
  • Gopinath, V and Shanmugha Sundaram, P 2018, ‘Performance Analysis of Diesel Engine Using Corn Oil Biodiesel and Preheating of Inlet Air: The Taguchi Approach’, Ecology, Environment and Conservation, vol. 24, no. 2, pp. 916-923.
  • Gobinath, V, Kaliyannan, Palaniappan, SathishKumar and Mohankumar, S 2018, ‘Mechanical and Tribological Behavior of SiC and Fly Ash Reinforced Al 7075 Composites Compared to SAE 65 Bronze’, Materials Testing, vol. 60, no. 12, pp. 1225-1231.
  • Gobinath, S, Senthilkumar, G, Beemkumar, N 2018, ‘ Comparative study of room temperature control in buildings with and without the use of PCM in walls’, Energy Sources ,Part A: Recovery, Utilization and Environmental Effects, Vol. 40, no. 14, pp 1765 – 1771.
  • Gobinath, S, Senthilkumar, G, Beemkumar, N 2018, ‘Air nanobubble enhanced combustion study using mustard biodiesel in a common rail direct injection engine’, Energy Sources ,Part A: Recovery, Utilization and Environmental Effects, Vol. 40, no. 15, pp 1809-1816.
  • Kalaiselvan, C, Rao, Lokavarapu Bhaskara 2018,’ Highly Accelerated Life Testing of Ceramic Capacitors Using Capacitor Test Board by Lognormal Method and Integrated with PLM Solutions’, Advanced Science Letters, American Scientific Publishers Volume 24, Number 8, pp.5859-5865(7).
  • Devakumaran, P, Balakrishnan, C, Chandran,S, Azhaguraja,C Veluchamy,B and Vivekanandan,M 2018,’Attainment Of Fully Developed Flow in Air Distribution Duct of Boiler Using CFD Analysis’,IJARIIE, Vol-4 Issue-2, pp,1021-1025.

International Conferences

  • Selvam V, ‘Reducing Cycle Time using Special Tools in CNC Machine’, International Conference on Information Sciences and Renewable Energy Sources at Selvam College of Technology, Namakkal on 7th and 8th March 2019.
  • Karthik R, ‘Involuntary Temperature Observing System for Poultry Eco-Friendly Setup’, International Conference on Information Sciences and Renewable Energy Sources at Selvam College of Technology, Namakkal on 7th and 8th March 2019.
  • Vairamani V, ‘Machinability of Aluminium Composite Matrix with Powder Mixed Electric Discharge Medium’, International Conference on Information Sciences and Renewable Energy Sources at Selvam College of Technology, Namakkal on 7th and 8th March 2019.
  • Saravanan G, ‘Design and Fabrication of Trolley for Modified Assembly Layout’, International Conference on Information Sciences and Renewable Energy Sources’ at Selvam College of Technology, Namakkal on 7th and 8th March 2019.
  • Jagadeesh D, ‘Optimisation of Spring in Safety Valve’, International Conference on Information Sciences and Renewable Energy Sources’ at Selvam College of Technology, Namakkal on 7th and 8th March 2019.
  • Mohan N, ‘Design a Fixture for Setting Stub for Manufacturing Header in P91’, International Conference on Information Sciences and Renewable Energy Sources at Selvam College of Technology, Namakkal on 7th and 8th March 2019.
  • Balasubramani K, ‘Recovery of Heat and Water from Boiler Blow Down’, International Conference on Information Sciences and Renewable Energy Sources at Selvam College of Technology, Namakkal on 7th and 8th March 2019.
  • Gobinath S, ‘Utilization of Water Heat by Heat Exchanger’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Selvakumar G, ‘Improvement of Turbine Efficiency in 210MW Thermal Power Station’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Chandrakumar S, ‘Startup Vent’s Steam Utilization in Chemical Recovery Boiler’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering’ at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Ravikumar N, ‘Design of Hydraulic Lift with Automobile Unloader for House Pulber’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Balasubramani K, ‘Problem Resolving Using Eight D Method’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Gopinath V, ‘Attainment of Fully Developed Flow in Boiler Duct’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Venkatesh R, ‘Design and Fabrication of Bike Engine for Irrigating Domestic Garden’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Arivazhagan R, ‘Study and Analysis on Supply Chain Management’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Saravanan G, ‘FEA of Supercritical Boiler Back Pass Lug Assembly’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Saravanan G, ‘Lubrication of Paper Machine in Pasaban Pulper Rotor Unit’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Gopalakrishnan K, ‘Eliminate the Repeated in CAP and Base Extruder’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Gopalakrishnan K, ‘Benefits of Baskets Changing from Gas Side to Air of RAPH’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.
  • Sivashankar N, “Design and Fabrication of Bike Engine for Irrigating Domestic Garden’, International Conference on Recent Trends in Nanomaterials for Energy, Environmental and Engineering at K.Ramakrishnan College of Technology, Tiruchirappalli on 14th and 15th March 2019.

National Conferences 

  • Balasubramanian R P, ‘Automatic Hydraulic Vertical Baling Press Machine’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Venkatesh R, ‘Comparative Analysis of Chromium Coated HSS Tool and Non Coated HSS Tool’, National Conference on Advancement’s in Mechanical Engineering at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Venkatesh R, ‘Conversion of Conventional Gear Box Application to Plantary Gear in Sugar Mills’, National Conference on Advancement’s in Mechanical Engineering at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Venkatesh R, ‘Problem Resolving Using 8D Method’, National Conference on Advancement’s in Mechanical Engineering at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Devakumar L, ‘Optimization of EDM for Improving Geometrical Errors’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Karthikeyan S K, ‘An Experimental Investigation and Process Parameter Optimization of PMEDM Process on SS304 Steel’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Jagadeesh D, ‘Design and Fabrication of Automatic Waste Collecting Robot’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Sivaprakash E, ‘Fabrication of Spatter Grinding Machine’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Sivaprakash E, ‘Sensor Operated Automatic Bamming Machine’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Karthikeyan S K, ‘Performance Analysis of Watertube Boiler and Its Tube Failure’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Kawin N, ‘Experimental Study of Automatic Lubrication System’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Gopinath V, ‘Analysis of Overall Equipment Effectiveness of a Panel Processing Machine’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Venkatesh R, ‘Conversion of Conventional Boiler to Fluidized Bed Combustion Boiler in Sugar Mill’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli  on 8th March 2019.
  • Sivashankar N, ‘Design and Analysis of Bending Angle in Various Material’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Raja P, ‘Design and Fabrication of Pneumatic Injection Molding Machine’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019
  • Periasamy K, ‘Effect of Corrosion Behavior of Mild Steel Coated with Nickel and Chromium’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Periasamy K, ‘Poultry Egg Collection U Type Automatic Converter System’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Selvakumar G, ‘Study and Analysis of Circularity Error in CNC Machines’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Mohankumar S, ‘Chemical Recovery Boiler Efficiency Improvement by Utilizing Recovery Boiler Blow Down Water’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Karthik R, ‘Design of Faceplate for Horizontal Boring Machine’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Dineshbabu C, ‘Design of Effective Cutting Plan Using Laser and Oxy Fuel Cutting’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Natarajan A, ‘Elimination of Roll Off in Dishpad and Dust in Scorching Machine’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Kumaravel S, ‘Design and Analysis of Finishing House Pulper Belt Conveyor System Using Sensors’, National Conference on Recent Trends in Engineering and Technology at Vetri Vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.
  • Raja P, ‘Investigation of Mechanical Behavior of Dissimilar Metal Welding for Monel and Inconel’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Vairamani V, ‘Comparative Analysis of Cryo Treated Weld Vs Conventional Weld’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Sakthivel M, ‘The Economic Reuse of Sugarmill Waste Management’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Balasubramanian R P, ‘Pneumatic Bearing Puller’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Muthukumar V, ‘A Study of Mechanical Properties of TIG Welding Joint of Mild Steel and Stainless Steel’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Kumaravel S, ‘Design of Chamfering Setup in Grinding Machine’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Dineshbabu C, ‘Optimization of Boiler Pipe Lines Using Caeser’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Meganathan J, ‘Rework Analysis in Blow Down Valve Used in Thermal Power Plant’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Mohankumar S, ‘Magneto Abrasive Flow Machining’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Periasamy K, ‘Design of Roller Conveyor with Pneumatic Stopper and Pusher’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Chandrakumar S, ‘Precision Gear-Cut Setting Attachment Through Shaping Machine’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Muthukumar V, ‘Modification of Grease Lubrication into Oil Lubrication System in Vertical Finishing House Pulper’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Ravikumar M, ‘Design and Fabrication of Fixture for Arresting Insulation Blanket of Local Heat Treatment For Circular Joint’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Jagadeesh D, ‘Design of Paddle Agitator for a Semi-Concentrated Black Liquor’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Sakthivel M, ‘Elasto Hydro Dynamic Lubrication in Spur and Helical Gear Contacts’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Arivazhagan R, ‘Problem Resolving in 8D Method’, National Conference on Challenges and Opportunities for Mechanical Engineering at Kongunadu College of Engineering and Technology, Thottiam on 16th March 2019.
  • Periyasamy R, ‘Auto Size Changing Mechanism for Paper Machine of Biometric Cutter’, National Conference on Advancements in Mechanical Engineering, at M.Kumarasamy College of Engineering, Karur on 15th March 2019.
  • Selvam V, ‘Efficiency and Performance Analysis of Stage I Boiler in TPS II’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Aravind Ra, ‘The Failure Re-Analysis of Top Mill Roll Shaft’, National Conference on Recent Trends in Engineering and Technology at Rathinam Technical Campus, Coimbatore on 15th March 2019.
  • Aravind Ra, ‘Design of Pivotally Tool Holder’, National Conference on Recent Trends in Engineering and Technology at Vetri vinayaha College of Engineering and Technology, Tiruchirappalli on 8th March 2019.

Academic Year  2017 - 2018

International / National Journals

  • Viswanathan, R, Ramesh, S and Subburam, V 2018, ‘Measurement and Optimization of Performance Characteristics in Turning of Mg Alloy under Dry and MQL Condition’, Measurement, vol. 120, no. 1, pp. 107-113.
  • Ragunath, N, Arulpandian, P, Gajendran, A, Selvam, V and  Kawin, N 2018, ‘Investigation of Immersion Test in Bus body Composites-A Comparative Study on Polymers’, International Journal for Scientific Research and  Development, vol. 5, no. 12, pp. 1017-1022.
  • Elavarasan, E, Mageshkumar, M, Periyasamy, R, Vairamani, V and Karthik, R 2018, ‘Experimental Investigation of Thermoacoustic Driven Thermoacoustic Refrigerator’, International Journal for Scientific Research and Development, vol. 6, no. 1, pp. 116-124.
  • Mohankumar, S, JeganPrabhakar, J, Kalaiyarasan, B, Kavinkumar, K and Natarajan, P 2018, ‘Design and Fabrication of Bio Composite Helmet’, International Journal for Scientific Research and Development, vol. 6, no. 1, pp. 1262-1263.
  • Saravanan, G, Rubanraj, R, Parthiban, A, Prakash, P and Ranjith Kumar, P 2018, ‘Experimental Analysis on Automation of Header Hydro Dummy Gas Cutting Machine’, International Journal for Scientific Research and Development, vol. 6, no. 1, pp. 1378-1381.
  • Sivashankar, N, Mohan, N, Periasamy, K, Vairamani, V and Chandrakumar, S 2018, ‘Stress and Optimal Design of Check Valve Disc Using Finite Element Analysis’, International Journal for Scientific Research and Development, vol. 6, no. 2, pp. 1185-1187.
  • Ravikumar, M, Kumaravel, S, Sivaprakash, E and Selvakumar, G 2018, ‘Enhancement of Micro-Sized Furniture by Using Wooden Wastes’, International Journal for Scientific Research and Development, vol. 6, no. 2, pp. 2713-2716.
  • Arivazhagan, R, Krishnan, P, Madhan, M, Mohanrajj, K and Nallasivam, Y 2018, ‘Design and Developing the Efficiency of Centrifugal Pump’, International Journal of Engineering, Science and Mathematics, vol. 7, no. 4, pp. 52-57.
  • Sureshbabu, S, Udhayaraj, S and Meganathan, J 2018, ‘Forging Defects Analysis in Suspension Arm and Controlling Flash’, International Journal for Scientific Research and Development, vol. 5, no. 11, pp. 122-124.
  • Raja, P , Abuthakeer, S, AneesAhamed, A, Hariharan, S and Dinesh, S 2018, ‘Power Generation and Reusing the Heat from Tunnel Kiln’, International Journal for Scientific Research and Development, vol. 6, no. 1, pp. 542-543.
  • Nithya, A and Gobinath, S 2018, ‘A Study on Effectiveness of Advertisements on FMCG’, International Journal of Accounts, Economics and Commerce Research,vol. 4, no. 3,pp. 1-2.
  • Balasubramani, K, Dineshbabu, C, Karthikeyan, G and Udhayaraj, S 2018, ‘Modernized Advancement of Industrial Washing Machine’, International Journal for Scientific Research and Development, vol. 6, no. 3, pp. 290-293.
  • Ravikumar, N 2018, ‘Review of Contaminated Lubricants in Bearing and Determination of Flash Temperature in Ansys’, International Journal of Research in Mechanical Engineering, vol. 5, no. 2, pp. 25-26.
  • Prabhakaran, P, Ranganathan, R, Muthukumar, V, Rajasekar, R, Devakumar, L and Pal, S K 2017, ‘Review on Parameters Influencing the Rice Breakage and Rubber Roll Wear in Sheller’, Archives of Metallurgy and Materials, vol. 62, no. 3, pp. 1875-1880.
  • Karthick, S, Karthikeyan, S K and Saravanan, G 2017, ‘Design, Analysis and Fabrication of Stair Climbing Robot with Tri-Wheel and Rover Mechanism’, International Journal of Science Technology and Engineering, vol. 3,no. 12, pp. 136 – 139.
  • Gopinath V, Shanmugasundram, P, Suresh, P, 2017,’Emission analysis of an Engine Operating on Corn Oil Methyl Ester Blends with Air Pre-heater’, International Journals of Renewable Energy Research, vol.7,no.4, pp. 1682-1685.

International Conferences

  • Venkatesh R, ‘Erosion Controller of Water Wall Tubes in Boiler’, International Conference on Newer Engineering Concepts and Technology at K.Ramakrishnan College of Technology, Tiruchirappalli on 23rd and  24th March 2018.
  • Gobinath S , ‘Alternate Bucket Wheel Drive Transmission System’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science, Selvam College of Technology, Namakkal on 16th and  17th March 2018.
  • Viswanathan R, ‘Design and  Analysis to Improve Effectiveness of Boiler Using Regenerator’ International Conference on Innovation in Biotechnology, Civil and  Mechanical Science, Selvam College of Technology on Namakkal 16th  and  17th March 2018
  • Viswanathan R, ‘Fabrication of Bio-Plastic Products from Crops’ International Conference on Civil, Mechanical, Chemical Engineering and Technologies’ at SVS College of Engineering, Coimbatore on 23rd and  24th February 2018.
  • Periasamy K, ‘Studies on the Fabrication of Surface Composites on CAS Aluminum Alloy by Friction Stir Processing’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science, Selvam College of Technology on Namakkal 16th and  17th March 2018.
  • Jagadeesh D, ‘Failure Analysis of Output Shaft of Gear Box’ International Conference on Newer Engineering Concepts and Technology at K.Ramakrishnan College of Technology, Tiruchirappalli on 23rd and 24thMarch 2018.
  • Jagadeesh D, ‘Design of Belt Conveyor for Finishing House Pulper’ International Conference on Sustainable Materials Design and Applications at Kongu Engineering College, Erode on 16th and 17th March 2018.
  • Saravanan G , ‘Automation of Induction Brazing’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science, Selvam College of Technology on Namakkal 16th and  17th March 2018.
  • Saravanan G, ‘Development of Tool Holder for Chamfering Bend Tube’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Arivazhagan R, ‘Automatic Brick Measuring System’ International Conference on Innovations in Engineering, Technology and Science’ at K.Ramakrishnan College of Engineering, Tiruchirappalli on  13th and  14thMarch 2018.
  • Balasubramani K, ‘Structural and Thermal Analysis of Disc Brake Using ANSYS’, International Conference on Innovations in Engineering, Technology and Science at K.Ramakrishnan College of Engineering, Tiruchirappalli  on  13th and  14thMarch 2018.
  • Gopinath V, ‘Investigation of Cryogenic Treated Drill Bit’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering’, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Karthikeyan S.K, ‘Design of Development of Universal Fixture for Lath Coil’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and 17th March 2018.
  • Karthikeyan S.K, ‘Design and Fabrication of Chest and ABS Crunch Machine’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam  on 23rd and  24th March 2018.
  • Dineshbabu C, ‘Slug Removing Magnetic Conveyor’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Selvam V, ‘Elimination of Leakage in Fluid Pipeline of Internal Heat Exchanger’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Karthik R, ‘Advanced in Heat Insulation for Boilers and Pipes’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Mohan N, ‘Analysis on Overall Equipment Effectiveness of a Panel Processing Machine’, International Conference on Newer Engineering Concepts and Technology at K.Ramakrishnan College of Technology, Tiruchirappalli on 23rdand 24th March 2018.
  • Mohan N, ‘Design and Fabrication of Oscillating Shower in Pulp Washing’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and 17th March 2018.
  • Vairamani V, ‘Design of Reel Splitting Machine by Using Sensor’ International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Kumaravel S, ‘Capacity Enhancement in Panel Processing Machine-II’, International Conference on Newer Engineering Concepts and Technology at K.Ramakrishnan College of Technology, Tiruchirappalli on 23rd and  24th March 2018.
  • Raja P, ‘Power Generation and Reusing Heat from Tunnel Kiln’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and 17th March 2018.
  • Selvakumar G, ‘Boiler Tube Failure Analysis’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16thand  17th March 2018.
  • Selvakumar G, ‘Experimental Investigation on Energy Conversion and Conservation in Thermal Power Plant’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam  on 23rd and  24th March 2018.
  • Gajendran A, ‘Performance Analysis of Air Preheater and Economizer in 210MW’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam  on 23rd and  24th March 2018.
  • Muthukumar V, ‘Effect of Increasing Inlet Feed Water Temperature on Heat Transfer performance of the Economizer in Coal Fired Power Plant’ International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and  17th March 2018.
  • Muthukumar V, ‘Failure Analysis of Hydraulic System in Telescopic Cranes Working in Mines’ International Conference on Newer Engineering Concepts and Technology at K.Ramakrishnan College of Technology, Tiruchirappalli  on 23rd and  24th March 2018.
  • Karthikeyan G, ‘Design of Feeder for Single Roller Ironer’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and 17th March 2018.
  • Karthikeyan G, ‘Performance Test on Diesel Engine by Using Alternative Fuel’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and 17th March 2018.
  • Sivaprakash E, ‘Design and Analysis of Shaft Failure in Paper Machine’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Meganathan J, ‘Experimental and Stress Analysis of Pipe Routing at Various Temperature and Pressure by Changing the Various Material Support’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Meganathan J, ‘Design the Tool for Manufacturing the Ferrule Easily’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam  on 23rd and  24th March 2018.
  • Chandrakumar S , ‘Experimental analysis of Various Couplents in Pulse Echo Manual Contact Ultrasonic Testing on Aluminium and Stainless Steels’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam  on 23rd and  24th March 2018.
  • Chandrakumar S, ‘Effect of thrust Force and Torque on Kevlar Reinforced Composites During Drilling Process’, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems at National Institute of Technology, Tiruchirappalli on 18th to 20th January 2018.
  • Kawin N, ‘Fabrication of Sandring Machine’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and 17th March 2018.
  • Arulpandian P , ‘Importing Heat Transfer Characteristics of Double Pipe Heat Exchanger using Helical Baffle on the Annular Space’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Karthick S, ‘Design and Fabrication of Water Drying Machine’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam  on 23rd and  24th March 2018.
  • Ragunath N, ‘Automatic Brick Measuring System’, International Conference on Innovations in Engineering, Technology and Science at K.Ramakrishnan College of Engineering, Tiruchirappalli on 13th and 14thMarch 2018.
  • Elavarasan E, ‘Design and Fabrication of Mini Refrigerator with Thermoelectric Cooling’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Elavarasan E, ‘Study of Hardness on Copper Alloy Reinforced with Ceramics for Machine Application’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Elavarasan E, ‘Hydrogen Fired Steam Boiler’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Elavarasan E, ‘A Combined Inflated Airbed and Additional Booster System for Emergency Landing’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Elavarasan E, ‘Tribological Test on Copper Based Hybrid Composite Material’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Elavarasan E, ‘Design and Fabrication of Mini Solar Refrigerator’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam on 23rd and  24th March 2018.
  • Mohankumar S, ‘Design and Fabrication of Second Operation Capstan Lathe’, International Conference on Innovation in Biotechnology, Civil and  Mechanical Science at Selvam College of Technology, Namakkal on 16th and  17th March 2018.
  • Periyasamy R, ‘Experimental and Numerical Analysis of Heat Transfer on Plate in Heat Exchanger at Different Fins with Ceramic Coating’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam  on 23rd and  24th March 2018.
  • Mageshkumar M, ‘Performance Evaluation of Four Stroke Diesel Engine with Pungamia Biodiesel as A Fuel’, International Conference on Innovations in Thermal, Manufacturing, Structural and Environmental Engineering, Kongunadu College of Engineering and Technology, Thottiam  on 23rd and  24th March 2018.
  • Ravikumar N, ‘Cycle Time Reduction of Gr91 Header’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and 17th March 2018.
  • Venkatesh R, ‘Computing Exposure Time of Carbon Steel’, International Conference on Newer Engineering Concepts and Technology at K.Ramakrishnan College of Technology, Tiruchirappalli on 23rd and  24th March 2018.
  • Sivaprakash E, ’Fixture for Plug type End Cover Fitup’, International Conference on Newer Engineering Concepts and Technology at K.Ramakrishnan College of Technology, Tiruchirappalli on 23rd and 24th March 2018.
  • Vairamani V, ’ Conservation of Stream in Paper Dryer’, International Conference on Innovation in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 16th and 17th March 2018.
  • Mohan N, ’Experimental Investigations of Mechanical Properties of Hardfaced Aluminium by TIG Welding’, International Conference on Advance in Mechanical, Production & Industrial Engineering at AMPIE on 14th and 15th Feb. 2018

National Conferences

  • Ravikumar N, ‘Designing of Multiple Hydro test Facility for Full Bore Valve Assembly’, National Conference on Engineering and Technology’ at Narasu’s Sarathy Institute of Technology, Salem on 23rd March 2018.
  • Udhayaraj S, ‘Design and Fabrication of Annealing Chain Conveyor’, National Conference on Engineering and Technology’ at Narasu’s Sarathy Institute of Technology, Salem on 23rd March 2018.
  • Sureshbabu S, ‘Design and Fabrication of Financially Repairing Radiant Tubes’, National Conference on Cutting Edge Technologies in Electrical, Communication and Soft Computing Techniques at Saranathan College of Engineering, Tiruchirappalli on 9th March 2018.
  • Sivashankar N, ‘Root Cause Analysis and Recommendation on Camshaft Operation Scrap’, National Conference on Engineering and Technology’ at Narasu’s Sarathy Institute of Technology, Salem on 23rd March 2018.
  • Elavarasan E, ‘Design and Fabrication of Double Die Drawing Process’, National Conference on Cutting Edge Technologies in Electrical, Communication and Soft Computing Techniques at Saranathan College of Engineering, Tiruchirappalli on 9th March 2018.
  • Kumaravel S, ‘Experimental Analysis of Increasing Condenser Efficiency’, National Conference on Engineering and Technology’ at Narasu’s Sarathy Institute of Technology, Salem on 23rd March 2018.
  • Kumaravel S and Ravikumar M, ‘Design and Development of Furniture by Using Micro Sized Wooden Wastes’, National Conference on Recent Trends in Mechanical and Manufacturing at Dhanalakshmi Srinivasan Engineering College, Tiruchirappalli  on 26th March 2018.

Academic Year  2016 - 2017

International / National Journals

  • Viswanathan, R, Ramesh, S, Elango, N, and Kamesh kumar, P 2017, ‘Temperature Measurement and Optimization in Machining Magnesium Alloy Using RSM and ANOVA’, Pertanika Journal of Science and Technology, vol. 25, no. 1, pp. 255-262, 2017.
  • Karthikeyan, S K, Siva Krishnan, K, Siva Raj, B, Sasikumar, M and Vijayakumar, R 2017, ‘Effect of Fuel Injection Pump on The Engine and  Simplified Pump Setting Procedure’, International Journal for Scientific Research and  Development, vol. 5, no. 1, pp. 959-961.
  • Arunkumar, M, Shivalingappa, D, Kumaravel,  S and Sathish Kumar, A 2017, ‘An Experimental Investigation on Corner Skidding Control System’, International Journal on Recent and Innovative Trend in Technology, vol. 3, no. 3, pp. 42-48.
  • Arunkumar, M, Ashwin Kannan, S, Sathish Kumar, A and Kumaravel, S 2017, ‘Simulation of Corner Skidding Control System’, International Journal of Advanced Engineering Research and Science, vol. 4, no. 3, pp. 120-125, 2017.
  • Saravanan, G, Sankaranarayanan, N, Senthamizhan, S and Sureshkumar, S and Vijay, M S, 2017, ‘The Economic Reuse of Sugar Mill Waste Management’, International Journal of Modern Trends in Engineering and Science, vol. 4, no. 4, pp. 332-337.
  • Gopinath, V, Subanesan, M, Vasanth, N, Thiyagu, S and Vignesh, R 2017, ‘Avoiding Drunken Driving Road Accidents by Using Alcoholic Sensors’, International Journal of Engineering and Applied Sciences, vol. 4, no. 5, pp. 81-83.
  • Vijayakumar, S, Mohan, N, Dineshbabu, C and Karthikeyan, G 2016, ‘Reduce the Mass Losses for Coated Al 7075 by Using Powder Mixed electric Discharge Coating’, International Journal of Modern Trends in Engineering and Science, vol.3, no. 7 , pp. 184-186.
  • Aravind, R A, Kumaravel, S, Kavin, M and Raja, P 2016, ‘Numerical Analysis of An Integrated Exhaust Duct System’, International Journal of Research in Mechanical Engineering, vol. 3, no. 3, pp. 12-13.
  • Ravikumar, M, Muthukumar, V, Rakheeb Basha, A M B and Sureshbabu, S 2016, ‘An Investigations of Mechanical and Thermal Properties of Composite Pipe’, International Journal of Research in Mechanical Engineering, vol. 3, no. 3, pp. 14-16.
  • Karthik, R, Ravikumar, N and Gopinath, V 2016, ‘Experimental Performance Analysis on Variable Compression Ratio Engine Using Diesel as Fuel’, International Journal of Research in Mechanical Engineering, vol. 3, no. 3,pp. 21-23.
  • Ravikumar, N, Balasubramani, K and Selvam, V 2016, ‘Dynamic Analysis on the Cross Plane Crankshaft Using ANSYS’, International Journal of Research and Mechanical Engineering, vol. 3, no. 4, pp. 1-3.
  • Arivazhagan, R 2016, ‘Combined Copper Aluminium Heat Exchanger’, International Journal of Research in Mechanical Engineering, vol. 3, no. 4, pp. 4-6.
  • Nithya, A and Gobinath, S 2016, ‘Advertising Strategies Towards Britannia Products’, International Journal of Management and Humanities, vol. 2, no. 6, pp. 6-8.
  • Nithya, A and Gobinath, S 2016, ‘A Study on Brand Preference with Special Reference to JPEE Alloys Coimbatore’, International Journal Engineering Research and Management Studies, vol.3 , no. 12, pp. 36-40.
  • Nithya, A and Gobinath, S 2016, ‘Emanating International Advertising Through Modern Technology’, International Journal of Advanced Engineering Technology, vol. 7, no. 2, pp. 1063-1065.
  • Gajendran, A, Chandrakumar, S, ArulPandiyan, P and Karthikeyan, S K 2016, ‘Investigation on The Effects of Methanol-Diesel Emulsions in a Di Diesel Engine Using Various Blends’, International Journal for Scientific Research and Development, vol. 4, no. 9, pp. 598 – 601.
  • Ragunath, N, Selvam, V, Karthikeyan, G, Meganathan, J and Balasubramani, K 2016, ‘Fire Retardant Laminates Test of Epoxy Resin and Polyester Resin Applied on Bus Bodies’, International Journal for Scientific Research and Development, vol. 4 , no. 10,pp.28-30.
  • Mohan, N, Vijayakumar, S, Vairamani, V and Raja, P 2016, ‘Analysis of Mechanical Properties on the Coir Fiber Composite Material’, International Journal for Scientific Research and Development, vol. 4, no. 9, pp. 606-609.
  • Sivashankar, N, Karthick, S and Kawin, N 2016, ‘Particle Characterization of Copper Nanoparticles by Electrochemical Method’, International Journal of Science Technology and Engineering, vol. 3, no. 1, pp. 262-266.
  • Ravikumar, M, Muthukumar, V, Sureshbabu, S and Kumaravel, S 2016, ‘Study and Investigation of Engine Muffler’, International Journal for Scientific Research and Development, vol. 4, no. 9, pp. 825-827.
  • Arivazhagan, R and Anban, G 2016, ‘Mobile source in automobiles’, IOSR Journal of mechanical and civil engineering, Vol. 13, no. 5, pp. 1-5.
  • Jagadeesh, D, Karthi, T, Mohan Raj, R and Raja, P, J, 2017, ‘Root Cause Analysis of Performance Anomalies in Soot Blowers of Chemical Recovery Boiler’ International Journal for Scientific Research & Development, Vol. 5, Issue 01,pp. 1168-1175.

International Conferences

  • Gopinath V, ‘Avoiding Drunken Driving Road Accident by using Alcoholic Sensors’, International Conference on Engineering, Energy and Environment at TRP Engineering College, Tiruchirappalli  on 31st March to 2nd  April 2017.
  • Jagadeesh D, ‘Mechanical Paint Removing Tools’, International Conference on Futuristic Innovations in Mechanical Engineering and Manufacturing Management at M.Kumarasamy College of Engineering, Karur on 30th and 31th March 2017.
  •  Periasamy K, ‘Bagasse Extraction System’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Periasamy K, ‘Introduction to Water Injection in Cement Factory’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Periasamy K, ‘Lean Manufacturing of Headers’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Periasamy K, ‘Modification of Coal Handling Chute Design’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Viswanathan R, ‘Reduction of Blow Holes in Cylinder Block’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Viswanathan R, ‘Automatic Work Holding in Four Jaw Chuck’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Muthukumar V, ‘Study of F91 Yoke Welding in Globe Valves for Stream Boilers’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Karthikeyan G, ‘Design and Analysis of  Economizer and Air Preheater’, International Conference on Advances in Biotechnology, Civil and  Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Periasamy K and Sivashankar N, ‘Design of FEA Analysis in the Disc of Check Value’, International Conference on Advances in Biotechnology, Civil and  Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Raja P, ‘Design and Development of the Telescopic Chute for Bagasse Stacker in TNPL’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Aravind Ra, ‘Design of Condenser for Reutilization of Exhaust Steam from Boiler’, International Conference on Newer Engineering Concepts and Technology at K.Ramakrishnan College of Technology, Tiruchirappalli on 28th and 29th March 2017.
  •  Saravanan G, ‘The Economic Reuse of Sugar Mill Waste Management’, International Conference on Advances in Biotechnology, Civil and  Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  •  Saravanan G, ‘Increasing the Chip Production by Extending the Life of Feed Roller’, International Conference on Advances in Biotechnology, Civil and  Mechanical Science at Selvam College of Technology, Namakkal on 17th and  18th March 2017.
  • Sivashankar N, ‘Design of FEA analysis on the Disk of Check Valve’, International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and 18th March 2017.
  • Arivazhagan R, ’Performance Analysis of Turbine’, International Conference on Advanced Materials & Processing, Organized by the Centre for Composite Materials at Kalasalingam University on 27th and 28th March 2017.
  • Vairamani V, ’Parameter and Optimization of Non-Metallic Laser Cutting’ International Conference on Advances in Biotechnology, Civil and Mechanical Science at Selvam College of Technology, Namakkal on 17th and 18th March 2017.

National Conferences

  • Jagadeesh D, ‘Root Cause Analysis of Performance Anomalies in Soot Blowers of Chemical Recovery Bolier’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Karthikeyan S.K, ‘Floating Solar PV Panel’, National Conference on Nexgen Technologies at Sengunthar Engineering College, Namakkal on 18th March 2017.
  •  Periasamy K, ‘Design and Analysis of Turbo Charger with 11and  12 Blades’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Meganathan J, ‘Design and Development of on Areca Leaf Plate using Die Fabrication’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Mohan N, ‘Cycle Time Reduction in Once Through Super Critical Boiler Panel’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Ravikumar M, ‘An Investigation of Agro Fuel in Boiler’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Selvam V, ‘Design and Analysis of Belt Conveyor for Finishing House Puiper’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Raja P, ‘Optimizing Process Parameters of Arc Welding on Mild Steel’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Dineshbabu C, ‘Experimental Analysis of MIG Welding SS409’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Balasubramani K, ‘An Investigation and  Predication of Flatness and Surface Roughness During Face Milling Operation’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Sivaprakash E, ‘Analysis of Moisture Reduction in Wetlap Machine Pulp Sheet’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Kawin N, ‘Cycle Time Reduction in Heater With Pressing Machine Using Nanolipter’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Karthick S, ‘Design and Modification of Wagon Coader Machine’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Chandrakumar S, ‘Design and Analysis of Leaf Spring in LMV’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Ragunath N, ‘Design of Reel Splitting Machine Using Hydraulic Cylinder’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Arivazhagan R, ‘Study on Defects in Orbital TIG Welding Process’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Karthikeyan S K, ‘Effect of Fuel Injection Pump on the Engine and  Simplified Pump Setting Procedure’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Gajendran A, ‘Experimental Analysis and Geometrical Effect on OHNS in CNC Drilling with Various Process Parameter’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Ravikumar N, ‘Power Consumption on Material Transport’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Gopinath V, ‘Optimization of Emission Characteristics of Diesel Engine With Corn Oil Methyl Ester Blends and Aph Using Taguchi Method’, National Conference on Annual Research Congress at Karpagam University, Coimbatore on 3rd December 2016.
  •  Muthukumar V and Ravikumar M, ‘Study and Investigation of Engine Muffler’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Mohan N, ‘Analysis of Mechanical Properties on the Coir Fiber Composite Material’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Selvam V, ‘Fire Retardant Laminates Test of Epoxy Resin and Polyester Resin Applied on Bus Bodies’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Kawin N, ‘An Investigations of Mechanical and Thermal Properties of Composite Pipe’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Arivazhagan R, ‘Combined Copper Aluminium Heat Exchanger’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Selvakumar G, ‘Numerical Analysis of an Integrated Exhaust Duct System’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Karthik R, ‘Experimental Performance Analysis on Variable Compression Ratio Engine Using Diesel As Fuel’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Karthikeyan S K, ‘Investigation on the Effects of Methanol-Diesel Emulsions in a Di Diesel Engine Using Various Blends’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Ravikumar N, ‘Review of Properties of Shape Memory Alloy’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Jagadeesh D, ‘Root Cause Analysis of Performance Anomalies in Soot Blowers of Chemical Recovery Bolier’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Saravanan G, ‘Optimization of CNC Tool Process Parameter’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Udhayaraj S, ‘Experimental Analysis of TIG Welding SS409’, National Conference on Recent Trends in Engineering and Management at Karpagam College of Engineering, Coimbatore on 22nd October 2016.
  •  Venkatesh R, ‘Analyse of Ultrasonic Metal Welding on Nonferrous Metal’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.
  •  Venkatesh R, ‘Improve the Reliability of Plug Screw Feeder’, National Conference on Emerging Trends in Engineering and Technology at Gnanamani College of Technology, Namakkal on 24th March 2017.

 Academic Year  2015 - 2016

International / National Journals

  • Elango V,  Jagadeesan V, ‘A Study on The Characteristics of Plate Welding of AISI 904L Super Austenitic Stainless Steel Using TIG, MIG and MMAW Processes’,International Journal of Applied  Engineering Research, vol.10, no.12, pp. 11467- 11479, 2015.
  • Elango V and Jegadeesan C, ‘Optimization of The Weld Bead Geometry in Gas Tungsten Arc Welding of AISI 904L Super Austenitic Stainless Steel by TOPSIS Methods’, International Journal of Applied Engineering Research, vol. 10, no, 24, pp.44092-44097, 2015.

  •  Nithya A, Gobinath SandMalyadri P, ‘Creative FMCG Packaging and Advertising’,VSRD International Journal of Accounts, Economics and Commerce Research, vol.1, no.1, pp. 15-23, 2015.

  • Nithya A and  Gobinath S, ‘Opportunities and Challenges of MSMEs’, International Journal of Modern Trends in Engineering and Science, vol.3, no.5, pp. 87-90,2016.

  • Jagadeesh D, Venkatachalam R and Nallakumarasamy G,‘Characterisation of Banana Fiber-A Review’, Journal of Environmental Nanotechnology,vol.2, no.4, pp. 23-26, 2015.

  • Saravanan G, Nallakumarasamy G andVenkatachalam R,‘Tribological and Thermal Characterization of Glass Fiber-A Review’, Journal of Environmental Nanotechnology, vol.2, no.4, pp. 27-30, 2015.

  • Babu B, Dharmalingam S, Karthikeyan S K, Karthik R andVairamani V, ‘Investigation of Electro Chemical Micro Machining Process Parameters on Al- SiCp - Gr Composites Using Taguchi Methodology’, International Journal of Chemical Technology Research,  vol. 8, no, 8, pp. 278-285, 2015.

  • Babu B, Raja K, Dharmalingam S, Udhayaraj S and Vairamani V, ‘Electrochemical Micro Machining on Hybrid Metal Matrix Composites’, International Journal of Chemical Technology Research , vol.8, pp. 508-518, 2015.

  • Periyasamy Kand Jayaraman M, ‘Studies on Fabrication of Surface Composites on Cast Aluminum Alloys Using Friction Stir Processing – A Review’,Journal of Environmental Nanotechnology, vol.5, no, 1, pp. 62-67, 2016.

  • Ramesh R,Viswanathan R and Ambika S, ‘Measurement and Optimization of Surface Roughness and Tool Wear Via Grey Relational Analysis, TOPSIS and RSA Techniques’,Elsevier - Measurement,vol.78, pp. 63–72, 2016.

International Conferences

  • Venkatesh R, ‘Performance Analysis of Multipurpose Solar Heating System by Using CFD’, International Conference on Advances in Mechanical Engineering at Anna University College of Engineering, Villupuram on 15th and  16th October 2015.

  • Elango V, Jagadeesh D, Periasamy K and G.Saravanan, ‘A Characteristic Study on TIG Welding Process Parameters Using Artificial Neural Networks and Response Surface Methodology for Super Austenitic Stainless Steel’, International Conference on Modern, Intelligent and Green Manufacturing at Erode Sengunthar Engineering College on 11th and  12th December 2015.

  • Elango V, ‘Gas Tungsten Arc Welding Process Parameter Optimization of Aisi 904l Super Austenitic Stainless Steel Joints using Taguchi Grey Relations Analysis’, International Conference on Modern, Intelligent and Green Manufacturing at Erode Sengunthar Engineering College on 11th and 12th  December 2015.

  • Viswanathan R, ‘Temperature Measurement and Optimization in Machining Magnesium Alloy using RSM and ANOVA’, International Conference on Computational Methods in Engineering and Health Sciences at University Putra Malaysia, Malaysia on 19th and 20th  December 2015.

  • Karthikeyan S K, ‘Lean Manufacturing in Chassis Assembly Through Poka – Yoke’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Kavin M, ‘Investigation and experimental studies on drilling parameters of Aluminium Hybrid metal matrix composites’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Vijayakumar S, ‘Investigation on the Wear Behavior Al 7075 Coated With Nickel + Boron Carbide’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Meganathan J, ‘Design and Analysis of propeller shaft by using composite materials’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Selvakumar G, ‘Particle Concentrations and Effectiveness of Natural Fibre Air Filter in Split Air Conditioner System’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Kumaravel S, ‘Wear Behavior of Aluminium/ Basalt Metal Matrix Composites’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Muthukumar V, ‘Wear Behavior of Rubber Roll Sheller in Rice Milling’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Mohan N, ‘Design and Analysis of Ball Catch Mechanism’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th and 16th October 2015.

  • Ravikumar M, ‘Experimental and Investigation of Natural Fiber Composite Material’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Ravikumar N, ‘E-Waste Management and its Approaches’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Udhayaraj S, ‘Improvement of Boiler Efficiency by Indirect Method’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Karthik R, ‘Increasing the Efficiency of Rotary Kiln by Reducing Heat’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Selvam R, ‘Reduction of Friction by using Pull Over Table in Coil Preparation Line’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Raja P, ‘Effect of Process Parameters on Microstructure and Mechanical Properties of FSW Dissimilar Joints’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Karthikeyan G, ‘Vibration Analysis of Gear Box System’ International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  •  Dineshbabu C, ‘Optimization of Boiler Operation and Maintenance’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

  • Aravind Ra, ‘Numerical Analysis of Reverse Flow in Multiple T-Joints’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th and 16th October 2015.

  •  Aravind Ra, ‘Numerical Analysis of an Integrated Exhausted Duct System’, International Conference on Sustainable Materials Design and Applications at Kongu Engineering College, Erode on 18th and 19th March 2016.
  • Vairamani V, ‘Investigation of Electrochemical Micro Machining Process Parameters on Al-SiCp’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th and 16th October 2015.
  • Aslam P, ‘Investigation on the Mass Loss of Al 7075 Coated with Nickel + Boron Carbide’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th and 16th October 2015.
  • Balasubramani K, ‘Optimization of Offset Operation in Micro Turn CNC Machine’, International Conference on Modeling, simulation and control, Karpagam College of Engineering, Coimbatore on 15 and 16 October 2015.
  • Arivazhagan R, ‘Combined Copper Aluminium Heat Exchanger’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.
  • Rakheeb Basha A M P, ‘An Investigations of Mechanical   and Thermal Properties of Composite Pipe’, International Conference on Modeling, Simulation and Control at Karpagam College of Engineering, Coimbatore on 15th  and 16th  October 2015.

National Conference

  • Viswanathan R, ‘Study of Machining Parameters for Machining of Magnesium Alloy’, National Conference on Advanced Research and Innovations in Mechanical Engineering at KCG College of Technology, Chennai on 22nd and  23rd April 2016.

Academic Year  2014 - 2015

International / National Journals

  • Gobinath S, Arumugam C, Ramya G andChandrasekaran M, ‘Optimization of Total Holding Cost in Job Shop Scheduling by Using Hybrid Algorithm’,Applied Mechanics and Materials, vol.591, pp. 176-179, 2014.
  • Gobinath S, Arumugam C, Tom page and Chandrasekaran M, ‘Solving Multi Objective Job Shop Scheduling Problems Using Artificial Immune System Shifting Bottleneck Approach’, Applied Mechanics and Materials, vol.  766-767, pp. 1209-1213, 2015.
  • Babu B, Karthikeyan S K and Adithya V, ‘Synthesis and Characterization of Al-Al2o3 Composites’, International Journal of Latest Trends in Engineering and Technology, vol.4, no. 2, pp. 321-329, 2014.
  • Babu B, Karthikeyan S K and Adithya V, ‘Experimental Investigation and Analysis of Corrosion and Hardness Using Aluminium Composites’, - International Journal of Latest Trends in Engineering and Technology, vol.4, no.4, pp. 37-46, 2014.
  • Babu B, Karthikeyan S K and Selvam V, ‘Experimental and Analysis of Welding Electrode Wire Straightening and Cutting Machine’, International Journal of Latest Trends in Engineering and Technology, vol.5, no.1, pp. 333 – 345, 2014.
  • Nithya Aand Senthilkumar S, ‘An Overview of Effect of Advertisement on FMCG with Special Reference to Multinational Products in Selected Asian Countries’,International Journal of Applied Environmental Science, vol.9, no.5, pp. 2551-2563, 2014.
  • Viswanathan Rand Ramesh S, ‘Optimizations of Turning Parameters on Tool Wear for Magnesium Alloy Using Taguchi Techniques’, IOSRD International Journal of Engineering,vol.1, no.1, pp. 46-50, 2014.

International Conferences

  • Gopinath V, ‘Performance Evaluation of Diesel Engine Runs on Bio Diesel Blending’, International Mechanical Engineering Congress at National Institute of Technology, Tiruchirappalli, on 13th to 15th June 2014.
  • Gopinath V, ’Experimental Investigation on Diesel Engine Fuelled by Corn Oil Methyl Ester Blend with Varying Inlet Air Temperature by Using APH’ , International Conference on Green Technology for Environmental Pollution Prevention and Control at National Institute of Technology, Tiruchirappalli on 27th to 29th September 2014.
  • Nithya A, ‘FMCG Ad – Big Issues and Challenging’, International Conference on Contemporary Issues and Challenges in Commerce and Management’ at Sri Ganesh College of Arts and Science, Salem on 13th February 2015.
  • Viswanathan R, ‘Optimization of Machining Parameters for Magnesium Alloy using Taguchi Approach and RSM’ International Conference on Advances in Design and  Manufacturing at National Institute of Technology, Tiruchirappalli on 5th to 7th December 2014.

National Conference

  • Nithya A, ‘Emanating Advertising Through Modern Market Layout’, National Conference on Managerial Innovations and Challenges in Globalised Economy at KSR College of Engineering, Namakkal on 26th September 2014.
  • Viswanathan R, ‘Optimization of Turning Parameters on Tool Wear for Magnesium Alloy Using Taguchi Techniques’ National Conference on Advances and innovations in Civil and Mechanical Engineering at Vel Tech College, Chennai on 23rd August 2014.
  • Gopinath V, ‘Experimental Study on the Performance Characteristics of A Diesel Engine Using Corn Oil as Fuel’ National Conference on 6th Annual Research Congress at Karpagam University, 5thand 6th December 2014.

Academic Year  2013 - 2014

International / National Journals

  • Venkatesh, R, & Christraj, W, 2013, ‘Experimental investigation of multipurpose solar heating system’, Journal of Energy Engineering, ISSN:0733-9402, Volume:141, Issue3.

  • Elango, V , Jagadeesh, D, Saravanan, G & Balasubramani, K, 2014, ‘Optimization of Offset Operation in MicroTurn CNC Machine’ International Journal of Scientific & Engineering Research , ISSN:2229-5518, Volume:5, Issue2, PP:425-436.

  • Velmanirajan, K , Karthikeyan, S.K & Dinesh, D, 2013, ‘Lean Manufacturing In Chassis Assembly Through Poka – Yoke’ International Journal of Technology Enhancements and Emerging Engineering Research , ISSN:2347-4289, Volume:1, Issue:1, PP:31-36.

  • Gobinath, S, Arumugam, C & Chandrasekaran, M, 2013, ‘A Hybrid Approach for Single Objective Job Shop Scheduling Problem’ Life Science Journal , ISSN:1097-8135, Volume:10, Issue3, PP:163-166.

  • Gopinath, V & Navaneethakrishnan, G, 2013, ‘Performance Evaluation of Gas turbine by reducing the inlet air temperature’ International Journal of Technology Enhancements and Emerging Engineering Research, ISSN:2347-4289, Volume:1, Issue1, PP:20-24.

  • Velmanirajan, K, Narayanasamy, R & Anuradha, K, 2013, ‘Effect of Chemical Composition on Texture Using Response Surface Methodology’ Journal of Materials Engineering and performance, ISSN:1059-9495, Volume:22, Issue11, PP:3237-3257.

  • Sivaprakash, E, Sridharan, M & Karthikeyan, S, 2014, ‘Performance Improving Methods For Series Solar Flat Plate Collectors And Introduction Of New Verification Tool’ International Journal of Innovative Research in Science, Engineering and Technology, ISSN:2347:6710, Volume:3, Issue3, PP:1155-1161.

  • Sivaprakash, E & Sridharan, M, 2014, ‘Experimental Investigation On Series Solar Flat Plate Collectors With Variable Mass Flow Rates’ International Journal of Innovative Research in Science, Engineering and Technology, ISSN:2347:6710, Volume:3, Issue3, PP:1150-1154.

International / National Conferences

  • Venkatesh, R, & Christraj, W , 2014, ‘Analysis of Heat Transfer Characteristics in Multipurpose solar heating system’, International Conference on Recent Trends in Engineering and Technology, Mountzion college of engineering and Technology, Pudukottai, March 2014.

  • Venkatesh, R, & Christraj, W, 2014, ‘Performance Analysis of Solar Air heater in multipurpose solar heating system’, International conference on Science, Engineering and Management, Srinivasan Engineering College, Perambalur, March 2014 .

  • Venkatesh, R,& Christraj, W, 2014, ‘Design and Development of Modified Solar Air Heating System in Summer Season’, National conference, K.Ramakrishnan College of Engineering, Trichy, March 2014.

  • Venkatesh, R, & Christraj, W, 2014, ‘Experimental Performance of Modified Solar Air Heating System in Winter Season’, National conference, Sengunthar Engineering College, Namakkal, March 2014.

  • Jagadeesh, D, 2013, ‘Business Application of Composite Materials’, International conference, Annai Mathammal Sheela Engineering College, October 2013.

  • Saravanan, G, 2013, ‘Performance of Bio fuels in IC Engines’, International conference, Annai Mathammal Sheela Engineering College, October 2013.

  • Gobinath, S,2013, ‘Advances in Industrial Engineering’, International conference, Annai Mathammal Sheela Engineering College, October 2013.

  • Gobinath, S,2013, ‘Emerging Trends in Engineering’, International conference, Sri Ganesh School of Business Management, February 2014.

  • Nithya, A , 2013, ‘Impact of FMCG Advertisement in Indian Business’ , International conference, Annai Mathammal Sheela Engineering College, October 2013.

  • Nithya, A , 2014, ‘Modern advertising strategy & technology for competency’ , International conference, SGSBM, Salem, February 2014.

  • Ravikumar, N , 2014, ‘Analyzing the vibration failure in pick head of the pick and place robot arm’ , International conference, Paavai Engineering College, May 2014.

  • Selvam, V, 2013, ‘Impact of Manufacturing Technology in Global Business’, International conference, Annai Mathammal Sheela Engineering College, October 2013.

  • Udhayaraj, S, 2013, ‘Impact of Modern Manufacturing Process’, International conference, Annai Mathammal Sheela Engineering College, October 2013.

  • Dineshbabu, C, 2014, ‘Fabrication of Hydraulic Floor Crane’, National conference, Nandha Engineering College, March 2014.

  • Aravind, RA , 2014, ‘Design and Analysis of an integrated Exhaust duct’, Kongu Engineering College, National conference, March 2014.

  • Aravind, RA , 2014, ‘Numerical Analysis of an integrated exhausted duct system’ , International conference,VIT, May 2014.

  • Karthikeyan, G , 2014, ‘Experimental analysis of composite material blended with thermoplastic & jute fabric’, National conference, Selvam college of Technology, April 2014.

  • Sivaprakash, E, 2014, ‘Transient thermal analysis on mixed mode solar FPC’ , International conference, Paavai Engineering College, May 2014.

  • Sivaprakash, E, 2014, ‘Experimental investigation on flat plate collectors with variable mass flow rates’, International conference, K.L.N college of Engineering & Technology, March 2014.

  • Sivaprakash, E, 2014, ‘Performance improving methods for series solar flat plate collectors & introduction of new verification tool’ , International conference, K.L.N college of Engineering & Technology , March 2014.

Academic Year  2012 - 2013

International / National Journals

  • Velmanirajan, K , Narayanasamy, R & Anuradha, K, 2013, ‘Statistical Evaluation of Forming Limit diagram for Annealed Al 1350 alloy sheet using first order reliability method’ ELSEVER , ISSN: 0307-904X,Volume:38, Issue1, PP:145-167.

  • Gopinath, V & Balanarasimman, N, 2012 ‘Effect Of Solidification Parameters On The Feeding Efficiency Of Lm6 Aluminium Alloy Casting’ ISOR Journal of Mechanical and Civil Engineering, Volume:4, Issue2, ISSN:2278-1684, PP:32-38.

  • Nithya, A , 2013, ‘A study of effect of advertisement of four wheeler of tata motors limited’ International journal of management, ISSN:0976-6502, Volume:4, Issue2, PP:85-90.

  • Nithya, A, 2013, ‘Advertising Strategy’ Indian Journal Of Research, ISSN:2250-1991, Volume:2, Issue2, PP:1-3.

  • Velmanirajan, K & Narayanasamy, R, 2012, ‘Effect Of Annealing Temperature In Al 1145 Alloy Sheets On Formability, Void Coalescence, And Texture Analysis’ Journal Of Materials Engineering And Performance , ISSN:1059-9495 ,Volume:22, Issue4, PP:1091-1107.

International / National Conferences

  • Elango, V, 2013, ‘Optimization of process parameters of TIG Welding process on super Austenetic Stainless Steel’, National Conference, Hindusthan college of engineering & Technology, May 2013.

  • Elango, V, 2012, ‘Optimization of process parameters of MIG Welding process on super Austenetic Stainless Steel’, National Conference, Vels University, November 2012.

  • Periasamy, K, 2013, ‘Studies on the Fabrication of Surface Composites on Cast Aluminium Alloys by friction stir processing’, National Conference, Annai Mathammal Sheela Engineering College, March 2013.

  • Arivazhagan, R , 2013, ‘Intelligent Manufacturing & Automation System NCIMAS 2013’ , National Conference, Hindusthan College of Engineering & Tech, May 2013.

  • Navanethakrishnan, G ,2013, ‘Performance Evaluation of Gas turbine’ , National Conference, PSG College of Technology , April 2013.

  • Jagadesh, D, Saravanan, G & Balasubramani, K, 2013 ‘Technical Advancement in Mechanical’, National Conference, Selvam college of Engg & Tech ,February 2013.

  • Nithya, A , 2013, ‘Implementing Advertising Strategy for Sustainable Development ’, International Conference, Sri Ganesh school of business , February 2013.

  • Karthikeyan, S K, 2013, ‘Rapid Prototyping’, National Conference, Karpagam University Coimbatore, March 2013.

  • Karthikeyan, S K, 2013, ‘Optimization of cutting Parameter’, International Conference, Vels University, April 2013.

  • Saravanan, G, 2012, ‘Effect of splitter blades on the flow field of a deep well pump’, National Conference, Vels University, November 2012.

  • Saravanan, G, 2013, ‘Stress and fatigue analysis of a CAM shaft’, National Conference, Hindusthan College of Engineering & Tech, May 2013.

  • Navanethakrishnan, G , 2013, ‘Fracture surfaces Analysis and Residual Strength of a rear axial leaf spring in a SUV’, International Conference, Vels University, April 2013.

  • Navanethakrishnan, G , 2013, ‘Fracture surfaces Analysis and Residual Strength of a rear axial leaf spring in a SUV’, National Conference, Karpagam University Coimbatore, March 2013.

  • Gobinath, S, 2012, ‘An Overview of Scheduling Problems’, National Conference, Vels University, November 2012.

  • Gobinath, S, 2013, ‘Optimization Technology’, International Conference, Sri Ganesh School of Business Management, February 2013.

  • Gobinath, S, 2013, ‘A State of art of review of Scheduling Techniques’, National Conference, Vels University, April 2013.

  • Dineshbabu, C,2013, ‘Challenges And Opportunities in Mechamical Engineering’, National Conference, Kongunadu College of Engineering and Technology, March 2013.

  • Dineshbabu, C, 2013, ‘Analysis Of Composite Materials Blended With Thermoplastic And Jute Fabric’, National Conference, Annai Mathammal Sheela Engineering College, March 2013.

  • Udhayaraj, S, 2013, ‘Product Development For Drip Irrigation Process by Sustainability Concepts’, National Conference, JKK Munirajan College of Technology, April 2013.

  • Udhayaraj, S, 2013, ‘Sustainable Life Cycle Design For Drip Irrigation Process’, National Conference, Kumaraguru College of Technology, April 2013.

  • Udhayaraj, S, 2013, ‘Product Development For Drip Irrigation Process by Sustainability Concepts’, International Conference, Dr.M.G.R. Educational and Research Institute University, April 2013.

  • Vairamani, V, 2013, ‘Studies on Automation of Roof sheet Welding using Curved Fixture by MAG Welding Process’, National Conference, Karpagam University, March 2013.

We use cookies to improve our website. By continuing to use this website, you are giving consent to cookies being used. More details…